Network Router User Manual

Wireless Router RNX-N150RT User Manual
- 17 -
Figure 3-5 Quick Setup
3. Click Next, and then WAN Connection Type page will appear, shown in Figure 3-6.
Figure 3-6 WAN Connection Type
The Router provides Auto-Detect function and supports three popular ways PPPoE,
Dynamic IP and Static IP to connect to the Internet. It’s recommended that you first use of
the Auto-Detect function. If you are sure of what kind of connection type your ISP provides,
you can select the very type and click Next to go on configuring.
4. If you select Auto-Detect, the Router will automatically detect the connection type your ISP
provides. Make sure One end of your cable is securely plugged into RNX-N150RT's WAN
port and your xDSL, Modem, or Ethernet's LAN port before detection. The appropriate
configuration page will be displayed when an active Internet service is successfully detected
by the Router.
1) If the connection type detected is PPPoE, the next screen will appear as shown in Figure
3-7.