User Guide

Wireless Router RNX-N150RT User Manual
e AP your router is going to
ect to as a client. You can also use the search function to select the BSSID to join.
security
configuration. It
pe.
key type is WEP (ASCII) or WEP (HEX).
- This option
should be chosen if the key type is WEP (ASCII) or WEP (HEX).
ng to connect needs password, you need to fill the
password in this blank.
your settings on this page.
1.
The operating distance or range of your wireless connection varies significantly based on the
 Near the center of the area in which your wireless stations will operate.
 In an elevated location such as a high shelf.
 Away from the potential sources of interference, such as PCs, microwaves, and cordless
phones.
 With the Antenna in the upright position.
 Away from large metal surfaces.
2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the router.
4.7.1.3. Wireless Settings in Multi-SSID
If y
ou select Multi-SSID mode in Figure 3-6 or Multi-SSID mode in Figure 4-3, the Wireless
Settings p
age will display as Figure 4-23.
 MAC Address of Remote AP (BSSID) - The BSSID of th
conn
 Survey - Click this button, you can survey the AP which runs in the current channel.
 Key type - This option should be chosen according to the AP's
is recommended that the security type is the same as your AP's security ty
 Auth Type - This option should be chosen if the
It indicates the authorization type of the Root AP.
 WEP Index
It indicates the index of the WEP key.
 Password - If the AP your router is goi
Be sure to click the Save button to save

Note:
physical placement of the router. For best results, place your router.
- 52 -