User Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the router
- 4.1 Login
- 4.2 Status
- 4.3 Quick Setup
- 4.4 Operation Mode
- 4.5 WPS
- 4.6 Network
- 4.7 Wireless
- 4.8 DHCP
- 4.9 NAT
- 4.10 Forwarding
- 4.11 Security
- 4.12 Parental Control
- 4.13 Access Control
- 4.14 Advanced Routing
- 4.15 Bandwidth Control
- 4.16 IP& MAC Binding
- 4.17 Dynamic DNS
- 4.18 System Tools
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Wireless Router RNX-N150RT User Manual
Wireless Router RNX-N150RT User Manual
- 56 -
The following table shows the detailed configuration for the switch
Processing mode of Utag
Port VLAN ID PVID Egress Rule
Frames
1 1 1 Untag
Forwarding
2 2 2 Untag
Forwarding
3 3 3 Untag
Forwarding
4 4 4 Untag
Forwarding
5
Port5 belongs to all
VLANs
1 Tag
Forwarding
Table 4-1 Configure the Tag VLAN Switch
Connect PC1, PC2, PC3 and PC4 to port1, port2, port3 and port4 of the switch respectively.
The corresponding VLAN IDs of the four ports are 1, 2, 3 and 4.
Configure port5 of the switch to be AN1, VLAN2, VLAN3 and VLAN4 and
connect it to the LAN port of TL-WA701ND.
re the VLAN ID of the PC that can log on to the Web management page of
RNX-N150RT via the LAN port equal to the PVID of port 5.
ted.
t communicate with each other, for example, PC1 and STA2.
two can
C2 and STA2.
the member of VL
Configu
3. Verify the communication status after the above configuration is comple
If VLAN ID of the PC connected to the switch is different from the VLAN ID of the wireless STA,
the two canno
If the PC connected to the switch and the wireless STA have the same VLAN ID, the
communicate with each other, for example P
Multi-SSID+
VLAN
- 56 -