User Guide

Wireless Router RNX-N150RT User Manual
mode in Figure 3-6 or Client mode in Figure 4-3, the Wireless Settings page
4.7.1.6. Wireless Settings in Client Mode
If y
ou select Client
will display as Figure 4-26.
Figure 4-26 Wireless Settings
 Wireless Name of Root AP (SSID) - The Wireless Name of the AP your router is going to
connect to as a client. You can also use the survey function to select the SSID to join.
 MAC Address of Root AP (BSSID) - The MAC Address of the AP your router is going to
connect to as a client. You can also use the survey function to select the BSSID to join.
 Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the router can be used. It may be illegal to use the wireless function of
the router in a region other than one of those specified in this filed. If your country or region is
not listed, please contact your local government agency for assistance.
 Channel Width - The bandwidth of the wireless channel.
 Enable Wireless Radio - The wireless radio of the router can be enabled or disabled to
allow wireless stations access. If enabled, the wireless stations will be able to access the
router; otherwise, wireless stations will not be able to access the router.
Be sure to click the Save button to save your settings on this page.

Note:
1. The operating distance or rang varies significantly based on the e of your wireless connection
physical placement of the router. For best results, place your router.
 Near the center of the area in which your wireless stations will operate.
 In an elevated location such as a high shelf.
- 61 -