User Guide

Wireless Router RNX-N150RT User Manual
 Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a
notice in red as shown in Figure 4-30.
Figure 4-30

Type - you can choose the type for the WEP security on the pull-down list. The default
hared Ke
y authentication type
d request.
n
the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length.
 WEP Key - Select which of the four keys will be used and enter the matching WEP key that
you create. Make sure these values are identical on all wireless stations in your network.
 Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption.
"Disabled" means this WEP key entry is invalid.
64-bit -
Y A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
SCII characters.
the key, the wireless security function is still disabled even if you have
settings on this page.
4.7.3 Wireless MAC Filtering
Choose menu “Wireless → MAC Filtering”, and then you can control the wireless access by
setting i
s Automatic, which can select
Open System or S
automatically based on the wireless station's capability an
 WEP Key Format - Hexadecimal and ASCII formats are provided here. Hexadecimal
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) i
ou can enter 10 hexadecimal digits (any combination o
f 0-9, a-f,
not promoted) or 13 ASCII characters.
152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 16 A

Note:
If you do not set
selected Shared Key as Authentication Type.
Be sure to click the Save button to save your
configuring the W
ireless MAC Filtering function, as shown in Figure 4-31.
- 64 -