User Guide

Table Of Contents
Wireless Router RNX-N150RT User Manual
CP Settings
t up by default as a DHCP (Dynamic Host Configuration
the TCP/IP configuration for all the PC(s) that are connected to
4.8.1 DH
Choose menu “DHCPDHCP Settings”, you can configure the DHCP Server on the page as
ter is seshown in Figure 4-36.The rou
Protocol) server
, which provides
the router on the LAN.
Figure 4-36 DHCP Settings
DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must
P address for the DHCP Server to start with when assigning IP
addresses. 192.168.1.100 is the default start address.
wed connection to
the router with their current dynamic IP Address. Enter the amount
of time in minutes and the user will be "leased" this dynamic IP Address. After the time is up,
the user will be automatically assigned a new dynamic IP address. The range of the time is 1
~ 2880 minutes. The default value is 120 minutes.
Default Gateway - (Optional.) It is suggested to input the IP address of the LAN port of the
router. The default value is 192.168.1.1.
Default Domain - (Optional.) Input the domain name of your network.
Primary DNS - (Optional.) by your ISP or consult your
rver if your
ISP
provides two DNS servers.
have
another DHCP server within your network or else you must configure the computer
manually.
Start IP Address -Specify an I
End IP Address -Specify an IP address for the DHCP Server to end with when assigning IP
addresses. 192.168.1.199 is the default end address.
Address Lease Time -The Address Lease Time is the amount of time a network user will
be allo
Input the
DNS IP address provided
ISP.
Secondary DNS - (Optional.) Input the IP address of another DNS se
- 69 -