User Guide

Wireless Router RNX-N150RT User Manual

Note:
Dos Protection will take effect only when the Traffic Statistics in “System Tool→Traffic
Statistics” is enabled.
 Enable ICMP-FLOOD Attack Filtering- Enable or Disable the ICMP-FLOOD Attack
Filtering.
 ICMP-FLOOD Packets Threshold (5~3600)- The default value is 50. Enter a value between
5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value, the
router will startup the blocking function immediately.
 Enable UDP-FLOOD Filtering- Enable or Disable the UDP-FLOOD Filtering.
ter will startup the blocking function immediately.
om WAN Port.
the ping packet from the Internet cannot access the
et from LAN cannot access the router.
efend against some viruses.
Click the Save button to save the settings.
Choose menu “Securit
y→Local Management”, you can configure the management rule in the
screen as shown in Figure 4-51.The management feature allows you to deny computers in LAN
from accessing the router
.
 UDP-FLOO
D Packets Threshold (5~3600)- The default value is 500. Enter a value between
5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set value, the router
will startup the blocking function immediately.
 Enable TCP-SYN-FLOOD Attack Filtering- Enable or Disable the TCP-SYN-FLOOD Attack
Filtering.
 TCP-SYN-FLOOD Packets Threshold (5~3600)- The default value is 50. Enter a value
between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set
value, the rou
 Ignore Ping Packet From WAN Port- Enable or Disable Ignore Ping Packet Fr
The default setting is disabled. If enabled,
router.
 Forbid Ping Packet From LAN Port- Enable or Disable Forbid Ping Packet From LAN Port.
The default setting is disabled. If enabled, the ping pack
This function can be used to d
Click the Blocked DoS Host List button to display the DoS host table by blocking.
4.11.3 Local Management
- 80 -