User's Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Installation
- Chapter 3 Connect to a Wireless Network
- Chapter 4 Configuration Using Wireless N Client Utility
- Chapter 5 AP Mode (Windows 7 Only)
- Appendix A: Specifications
- Appendix B: Glossary
- Appendix C: FAQ
Wireless N PCI Adapter RNX-N250PC2 User Manual
3
the best choice for easily adding or upgrading wireless connectivity to your desktop.
1.2 Features
¾ Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards
¾ Supports WPA/WPA2 data security, TKIP/AES encryption
¾ Supports high rate of up to 300Mbps for maximum throughput, supports automatically adjust
to lower speeds due to distance or other operating limitations
¾ Provides 32-bit PCI interface
¾ Supports Ad Hoc and Infrastructure modes
¾ Good capability on anti-jamming
¾ Supports roaming between access points when configured under Infrastructure mode
¾ Easy to configure and provides monitoring information
¾ Supports Windows XP, Windows Vista and Windows 7
¾ Two antennas which are listed in a format of 2x2 for two receivers and two transmitters
1.3 LED Status
LED status:
Status Working Status
Off
The driver has not been installed;
The adapter's radio has been disabled.
Flashing Slowly
The driver has been installed but no data is being transmitted or
received.
Flashing Quickly Data is being transmitted or received.