User Guide
Wireless 300 Mbps PCI-Express Wi-Fi Adapter Wireless 300 Mbps PCI-Express Wi-Fi Adapter
User Manaul User ManaulRNX-N250PCEv2 RNX-N250PCEv2
20 21
Appendix A: Specifications
Normal
Interface PCI-Express x 1
Standards IEEE802.11b; IEEE802.11g; IEEE802.11n
Operating System Windows XP, Windows 7, Windows 8.1, Windows 10
Throughput 300 Mbps (Maximum)
Radio Data Rate
11b: 1/2/5.5/11 Mbps
11g: 6/9/12/18/24/36/48/54 Mbps
11n: 300 Mbps (2.4 GHz)
Modulation
11b: QPSK, BPSK
11g: QPSK, BPSK, 16-QAM, 64-QAM
11n: QPSK, BPSK, 16-QAM, 64-QAM, 256-QAM
Media Access Protocol CSMA/CA with ACK
Data Security WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
Frequency* Band 2.4 to 2.484 GHz
Spread Spectrum Direct Sequence Spread Spectrum (DSSS)
Safety & Emissions FCC, CE, WIFI
Antenna 2 x 2.4 GHz 5 dBi Omni-Directional Detachable Antennas (RP-SMA)
Environmental and Physical
Working Temperature 0˚C to 40˚C (32˚F to 104˚F)
Storage Temperature -40˚C to 70˚C (-40˚F to 158˚F)
Working Humidity 10% to 90% RH, Non-Condensing
Storage Humidity 5% to 95% RH, Non-Condensing
* Only 2.412 to 2.462 GHz is allowed to be used in the USA, which means only channel 1 to 11
is available for American users to choose.
Figure 4-20
Figure 4-21
2. Click Start PBC on the AP-Router WPS cong page (Figure 4-20).
3. Please wait when the PBC method window pop-up appears; the secure connection
between AP and wireless NIC will be established automatically (Figure 4-21).
Note:
If there is more than one AP on the PBC mode, there will be a session overlap.
Please use Method 1: PIN Input Cong (PIN) or wait a while before pushing the button again.