User Guide

Wireless 300 Mbps PCI-Express Wi-Fi Adapter Wireless 300 Mbps PCI-Express Wi-Fi Adapter
User Manaul User ManaulRNX-N250PCEv2 RNX-N250PCEv2
10 11
3. When “Connected” appears behind the SSID (Figure 3-11), you have successfully
connected to the target network.
Figure 3-11
Figure 3-12
Figure 3-13
Figure 3-14
If the adapter is connected to the network for the rst time, you will be asked whether to
connect to devices (Figure 3-12). Please select “Yes” or “No” according to your internet
environment.
Note:
3.2.4 In Windows 10
Windows 10 users may use the built-in wireless utility. Follow the steps below:
1. Click the icon at the bottom of your screen and a network list will appear at the right
side of your screen. Select your target network, then click Connect (Figure 3-13).
2. If the network is unencrypted, you will directly connect to it.
If the network is encrypted, enter the password (network security key) and then click
Next to continue (Figure 3-14).
You can also push the WPS/QSS button on your router as suggested; “You can also
connect by pushing the button on the router”. Then click Next to continue..
Note: