User's Manual

RNX-N300UB
300Mbps Wireless N USB Adapter
26
Chapter 4 Management
This section will show you how to configure your RNX-N300UB adapter using the Rosewill
Wireless Configuration Utility (RWCU).
The RNX-N300UB adapter uses the Rosewill Wireless Configuration Utility as the management
software. The utility provides users with an easy interface to change any settings related to the
adapter. Double-clicking on the
icon on your desktop will start the utility.

Note:
For Windows 8.1, RWCU is not supported.
4.1 Profile
Your wireless networks may vary in different places like home, office or coffee shop. With
Profile management, you can easily save and manage various networks to be connected,
saving you the trouble of having to repeat the same configurations. Click Profile in the tools
section, the following page will appear.
Figure 4-1
4.1.1 Add a profile
To add a profile, click the Add button on the bottom of the screen. Then the configuration
window will appear.
If you are connecting to a wireless router or access point, select Infrastructure as the Network
Type, and if you are connecting to another wireless client such as an adapter, select ad hoc as
the Network Type. Then, the screen bellow will appear. Follow the instructions below to finish
the setting.