User manual

Wireless Adapter RNX-N4 User Manual
23
• The wireless wizard will inform you that there are two major steps in the process.
1. Select the configuration method for your wireless network
2. Connect your wireless device
• Click on the Next button to continue.
• You may select from three available options:
1. PIN: Select this radio button if your wireless device supports PIN
2. Push Button: Select this radio button if your wireless device supports push button.
3. Manual: Select the radio button if you would like to setup your wireless device manually.
Refer to chapter 5 in order to manually configure the device.
• The wizard will either display the wireless network settings to guide you through manual
configuration, prompt you to enter the PIN for the device, or ask you to press the
configuration button on the device. If the device supports Wi-Fi Protected Setup and has a
configuration button, you can add it to the network by pressing the configuration button on
the device and then the on the router within 60 seconds. The status LED on the router will
flash three times if the device has been successfully added to the network.