User manual

Wireless Adapter RNX-N4 User Manual
25
• WPS is used for WiFi Protected Setup. By pressing the WPS button on the front panel
of the device, the security settings of the device will automatically synchronize with
other wireless devices on your network that support Wi-Fi Protected Setup
• If the device supports Wi-Fi Protected Setup and has a configuration button, you can
add it to the network by pressing the configuration button on the device and then the
on the router within 60 seconds. The status LED on the router will flash three times if
the device has been successfully added to the network.
• Select the Push Button radio button and then click on the Next button.
• Press the WPS button on the device (which is located on the left side of the front panel) and
then click on the Next button.
5. WIRELESS NETWORK SETUP WIZARD
This wizard will guide you in the configuration of the wireless network settings such as the SSID
and security (WEP/WPA).
.Please refer to Chapter 6 in order to configure the more advanced features of the device
5.1 LOGGING IN
• To configure the device through the web-browser, enter the IP address of the device (default:
192.168.1.2) into the address bar of the web-browser and press Enter.