User manual

Wireless Adapter RNX-N4 User Manual
34
6. ADVANCED WEB CONFIGURATION
6.1 LOGGING IN
• To configure the device through the web-browser, enter the IP address of the Bridge
(default: 192.168.1.2) into the address bar of the web-browser and press Enter.
• Make sure that the device and your computers are configured on the same subnet. Refer to
Chapter 2 in order to configure the IP address of your computer.
• After connecting to the IP address, the web-browser will display the login page. Select
Admin from the drop-down list and then leave the password field blank.
After logging in you will graphical user interface (GUI) of the device. The navigation drop-down
menu on left is divided into six main sections:
Basic: This menu includes the wireless wizard, network settings, wireless settings, and WAN
settings.
• Advanced: This menu includes virtual server, special applications, port forwarding, routing,
access control, web filter, MAC address filter, firewall, etc.
• Tools: This menu includes time, firmware, system log, DDNS, schedules, etc.
• Status: This menu displays the wireless status, logs, statistics, routing, and internet
sessions.
• Help: Displays the help for configuring the device.
• Logout: Used to logout of the device.