User manual

Wireless Adapter RNX-N4 User Manual

• Enable Wireless: Place a check in this box to enable the wireless interface, it is

enabled by default.

• Wireless Network Name: The SSID is a unique named shared amongst all the points

of the wireless network. The SSID must be identical on all points of the wireless

network and cannot exceed 32 characters.

• 802.11 Mode: Select the IEEE 802.11 mode from the drop-down list. For example, if

you are sure that the wireless network will be using only IEEE 802.11g clients, then it is

recommended to select 802.11g only instead of 2.4 GHz B+G which will reduce the

performance of the wireless network. You may also select Mixed 802.11n, 802.11g and

802.11b. If all of the wireless devices you want to connect with this router can connect

in the same transmission mode, you can improve performance slightly by choosing the

appropriate "Only" mode. If you have some devices that use a different transmission

mode, choose the appropriate "Mixed" mode.

• Wireless Channel: Select a channel from the drop-down list. The channels available

are based on the country’s regulation. A wireless network uses specific channels in the

wireless spectrum to handle communication between clients. Some channels in your

area may have interference from other electronic devices. Choose the clearest channel

to help optimize the performance and coverage of your wireless network.

• Transmission Rate: Select a transmission rate from the drop-down list. It is

recommended to use the Best (automatic) option.

• Channel Width: Select a channel width from the drop-down list.

• Visibility Status: Select Visible or Invisible. This is the SSID broadcast feature. When

this option is set to Visible, your wireless network name is broadcast to anyone within

the range of your signal. If you're not using encryption then they could connect to your

network. When Invisible mode is enabled, you must enter the Wireless Network Name

(SSID) on the client manually to connect to the network.

• Show Active Clients: Click on this button to view a list of clients that are associated

with this device.

• Click on the Save Changes button to store these settings.