User's Manual

Wireless Dual Band USB Adapter RNX-N600UB User Manual
Chapter 3. Connect to a Wireless Network
With both the hardware and software successfully installed into your computer, you can quickly
connect to a wireless network using one of the following methods.
1. To connect using ROSEWILL Wireless Configuration Utility
RNX-N600UB uses the ROSEWILL Wireless Configuration Utility as the management software. The
utility provides you an easy interface to connect to a network and to change any settings related to
the wireless adapter.
2. To connect using WPS
Just by pushing the WPS button, you can set up a wireless connection quickly under the condition
that your router or access point supports WPS (also called QSS).
3. To connect using Windows built-in wireless utility
Windows users may use the built-in wireless utility to connect to a wireless network. For specific
operations, please go to 3.3 To connect using Windows built-in wireless utility
.
3.1 Connect by ROSEWILL Wireless Utility
1. After installation, the utility configuration page will automatically pop up on the screen. If the
utility page does not pop up, you can launch the utility by double-clicking the
icon on your
desktop.
Figure 3-1
8