User's Manual

Wireless Dual Band USB Adapter RNX-N600UB User Manual
5. To view more information about the network currently connected, click Status in the tools
section and the page will display information such as the network type, link quality and wireless
mode.
Figure 3-6
3.2 Connect by WPS
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
1.
If the wireless router supports WPS (or QSS), you can establish a wireless connection
between the wireless card and router using either Push Button Configuration (PBC)
method or PIN method. Three WPS connection methods are listed in the following parts.
PBC (Push Button Configuration) method
2. Press the WPS button on the back panel of the router. Here takes Router RNX-N150RT for
example; press the WPS/Reset button for 2~3 seconds.
Figure 3-7
3. Press the WPS button on the adapter. There are two ways:
Press and hold the WPS button on the adapter directly for 2~3 seconds until Figure 3-9 appears.
11