User's Manual

Wireless Dual Band USB Adapter RNX-N600UB User Manual
Figure 3-11
3.2.1 PIN method
There are two ways to configure the WPS by PIN method:
1) Enter the PIN from your AP device.
2) Enter a PIN into your AP device.
Following are detailed configuration procedures of each way.
3.2.1.1 Enter the PIN from your AP device
1. Open the utility and click WPS tab. Select Enter the PIN of my access point or wireless
router. In the empty field beside PIN, enter the PIN labeled on the bottom of the router (here we
use 13492564 as an example). If you have generated a new PIN code for your router, please
enter the new one instead. Click Connect to continue.
Figure 3-12
13