User's Manual

Wireless Dual Band USB Adapter RNX-N600UB User Manual
Chapter 1. Product Overview
1.1 Introduction
The adapter is an 802.11n client device designed to deliver a high-speed and unrivaled wireless
performance for your devices. It has better speed and range with less interference compared to
other 11N adapters, thus you can get a better Internet experience, such as downloading, online
gaming, Internet phone calls and video streaming.
With 802.11n technology, higher throughput improvement by 2T2R, the RNX-N600UB’s auto-sensing
capability allows high packet transfer rate of up to 300Mbps for maximum throughput. It has good
capability on anti-jamming, and it can also interoperate with 802.11b products. The adapter supports
WEP, WPA and WPA2 encryption to protect and secure your personal information.
The adapter is easy to install and manage with the Quick Setup Wizard guiding you step-by-step
through the installation process and the ROSEWILL Wireless Configuration Utility leads you to set up a
wireless connection fast. With excellent wireless performance, reception, and security protection, the
RNX-N600UB is the best choice for easily adding or upgrading wireless connectivity to your devices.
1.2 Features
 Complies with IEEE802.11n/g/b/a standards
 Supports WPA-PSK/WPA2-PSK, WPA/WPA2, TKIP/AES encryption, WEP encryption
 300Mbps maximum throughput for 2.4 and 5.0 GHz
 Supports Ad-Hoc and Infrastructure modes
 Supports roaming between access points when configured in Infrastructure mode
 Supports Windows 8, Windows 7, Windows Vista, and Windows XP
1.3 Hardware Overview
LED status:
Status Working Status
On The adapter has connected to a network.
Flashing Slowly The driver has been installed but no data is being transmitted or received.
Flashing Quickly Data is being transmitted or received.
Note:
When the adapter failed to connect to a wireless network, the LED may be off. Please choose your
network and try to connect again.
2