4U Rackmount Chassis RSV-X4000 User Manual
4U Rackmount Chassis RSV-X4000 User Manual Overview z Support ATX motherboard z Lockable front panel door z Foldable Zink Alloy handle Exploded Diagram Product Concept RSV-X4000 is 19” 4U height rackmount chassis designed for various kinds of server computer. This full sealed and well-ventilated steel chassis is specially designed to withstand heavy shock, dust, humidity, trembling, vibration and extremely high operating temperature in the harsh environment.
4U Rackmount Chassis RSV-X4000 User Manual Specification Dimension: 430mm (w) x 177mm (h) x 536mm (d) Construction: All SECC with Zinc Alloy handle Motherboard: Full size ATX Drive bay: 3 x 5.25” & 7 x 3.5” Indicator: LED display for power on/off and HDD Cooling Fan: 8cm x 2 (front) & 12cm x 1 (back) Power Supply: ATX or Redundant PSU (optional) Extension Slot: 7 slots Available Color: Silver & Black System Installation Removing top cover The top cover is fixed to the chassis by four screws.
U Rackmount Chassis RSV-X4000 User Manual Install Storage Device User may customize the installation of storage device. x 5.25” and 7 x 3.5” bay are provided. Motherboard installation z Unfasten the screws of add-on card retainer z Take off the add-on card retainer.
4U Rackmount Chassis RSV-X4000 User Manual z Put the MB clippers in the accessory bag. z If you are using big MB, you may need to install plastic stand-off on the MB screw hole z Install the MB with screws 5.25” drive bracket installation z Unfasten screws of on the top of drive bracket.
4U Rackmount Chassis RSV-X4000 User Manual z Remove drive bracket from chassis. z Install 3 x 5.25” device into front 5.25” drive bay z Install another 3.5” device on the right side of bracket.
4U Rackmount Chassis RSV-X4000 User Manual 3.5” drive bracket installation z Remove the screws of on the top of drive bracket. z Drive bracket being removed z Install 3 x 3.5” device into 3.5 drive bay and secure it z Install another 3.5”device on the holder.
4U Rackmount Chassis RSV-X4000 User Manual z Install floppy on the holder fasten by screws. z User may house in the device bracket into the chassis and fasten all screws. Install Add-On Card z Apply add-on cards onto the slots z Secure add-on cards on card retainer z CPU, memory and other devices can be mounted at this stage on the convenience of user. z Fasten the add-on card retainer back. Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.
