2.
.5” SATA TO USB External Enclosure RX25-AT-SC-BLK/SLV User Manual Hardware Installation Guide ☆ Please follow the instructions and make sure your hard drive is successfully installed to the external enclosure! STEP1 : Release the 2 screws then pull out the rear panel and tray. STEP2 : Place the HDD into the tray. Push the HDD to connect the SATA connector. Note: Make sure all connectors are connected well. STEP3: Screw the HDD on the tray tightly.
2.5” SATA TO USB External Enclosure RX25-AT-SC-BLK/SLV User Manual Note: Please slope tray 30˚ to the case, so it can be push-in smoothly without cause. 1. 2. 30° 3. 4. STEP4: Screw the rear panel and enclosure together.
2.5” SATA TO USB External Enclosure RX25-AT-SC-BLK/SLV User Manual HDD Formatting Guide ☆ You may format your external HDD through USB connection. ☆ Please make sure your external HDD is turned on and well connected to the PC before formatting the HDD. STEP1 : Right -click “My Computer” icon and select the”Manage” column. STEP2 : Select “Disk Management” and you will see your External HDD showed “Unallocated”. STEP3 : Right-click on the “Unallocated” block and select “New Partition”.
2.5” SATA TO USB External Enclosure RX25-AT-SC-BLK/SLV STEP4: The “New Partition Wizard” will appear. wizard and complete the partition. User Manual Please follow the instruction of the STEP5: When new partition is completed, the external HDD will be recognized as a “New Volume”. STEP6 : Double-click “My Computer”. PC. You will see the new volume appears on your Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.
