[ RX353 Series ] 3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual FEATURES • Support up to 1000GB • Front Panel Light beam affiliated Power ON/OFF switch • Power On/Off for internal cooling fan • OS Supports Win2000/ME/XP/VISTA, and Mac OS 8.6/9.x/10.x and above and Linux kernel after 2.4.1.0 • Power: 100~240 AC Adapter with 12V/DC output • SATA to USB 2.0, Back ward compatible to USB 1.
.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] STEP1 Take out the enclosure from Aluminum cover. STEP2 You will see the internal structure of the Enclosure.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual STEP3 Fit the 3.5” HDD SATA connector into PCB’s SATA connector. Push the HDD toward the PCB and make sure the connector is well connected.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] STEP4 Screw the HDD on the enclosure tightly. STEP5 Push the HDD prop into the Aluminum Cover.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] STEP6 Please install both screws STEP7 Press the LED switch for power on/off.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual HDD Formatting Guide z You may format your external HDD through USB2.0 connection. z Please make sure your external HDD is turned on and well connected to the PC before formatting the HDD. STEP1: Right-click “My Computer” icon and select the “Manage” column. STEP2: Select “Disk Management” and you will see your External HDD showed “Unallocated”.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual STEP3: Right-click on the “Unallocated” blocks and selects “New Partition”. STEP4: The “New Partition Wizard” will appear. instruction of the wizard to complete.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual STEP5: When new partition is completed, the external HDD will be recognized as a “New Volume”. STEP6: Double-click “My Computer”. volume appears on your PC.
3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.50mm fan [ RX353 Series ] User Manual NOTICE Question:Does this SATA enclosure support hot swap? Answer:Yes, but it depends on the motherboard you have. 1. If your motherboard has an eSATA port in the Back I/O Connectors Panel as shown in picture # 1 your hot-swap function is supported and there is no need to install the eSATA bracket. All you need is connecting the enclosure with eSATA port at the back of your computer.