Wired Internet Camera RXS-3211 Quick Installation Guide
Wired Internet Camera RXS-3211 Quick Installation Guide Knowing your IP Camera Check your package Figure 1.1-1 Item Name Quantity 1 Rosewill RXS-3211 Wired Internet Camera 1 □ 2 5V/1A Power Adapter 1 □ 3 Camera Stand accessory kit Wall Mount Stand 1 □ Wall Anchors 3 □ Screws 3 □ 4 39.3in (100cm) Category 5 Ethernet Cable 1 □ 5 Quick Installation Guide 1 □ 6 CD (Including User Manual/Utility/Driver) 1 □ If any of the above items are missing, please contact Rosewill Support.
Wired Internet Camera RXS-3211 Quick Installation Guide Camera Front and Rear View Power LED status Camera Lens LAN LED Figure 1.4-1 Front View Power LED: Indicates power and WPS status LAN LED: Indicates LAN activity Camera: Video camera with lens LED activity for LAN / Power LED will be given later. Stand Connector Figure 1.
Wired Internet Camera RXS-3211 Quick Installation Guide Stand Connector: Connects to any standard tripod / camera wall holder. WPS / Reset Button: Press and release this button to activate WPS mode (WPS mode is not available in Wired Camera); press and hold this button for 10 seconds to clear all settings of this camera and return to factory default. Power Jack: Connect to 5V power adapter. LAN Jack: Connect to LAN by Ethernet cable.
Wired Internet Camera RXS-3211 Quick Installation Guide Figure 1.6-1 3. Plug the power adapter to wall socket, and connect the power connector to the power jack located at the back of the IP camera. Figure 1.6-2 4. Connect your stand to the connector or place the camera in a secure place, and point the camera to the place you wish to monitor.
Wired Internet Camera RXS-3211 Quick Installation Guide Camera Software Installation Follow the simple steps below to run the Install Wizard to guide you quickly through the Installation process. The following installation is implemented in Windows XP. The installation procedures in Windows 2000/XP/Server 2003/Vista/Win7 are similar. 1. Insert the CD shipped along with the Internet Camera into your CD-ROM drive. The “Autorun.exe” program should be executed automatically. If not, run “Autorun.
Wired Internet Camera RXS-3211 Quick Installation Guide Figure 1.7-1 3. First click “Install Administrator Utility“ and when the following window appears, click “Next”. Figure 1.7-2 4. You can specify the destination folder of software installation; you can just use the default folder, and click “Next” to continue.
Wired Internet Camera RXS-3211 Quick Installation Guide Figure 1.7-3 5. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, and click “Next” to continue. Figure 1.7-4 6.
Wired Internet Camera RXS-3211 Quick Installation Guide previous step to modify installing settings. Figure 1.7-5 7. The installing procedure will take some time, please be patient. Figure 1.7-6 8. When you see this window, it means the software installing procedure is complete.
Wired Internet Camera RXS-3211 Quick Installation Guide surveillance software will start after you click “Finish” button, if you want to start it later, uncheck “Launch IP Cam Surveillance Software” box). Figure 1.7-7 9. After finished the installation of Administrator Utility, please go back to wizard page and click “Install Surveillance Software“, the system will start running viewer installation and the procedures are similar to the installation of administration utility. Figure 1.7-8 10.
Wired Internet Camera RXS-3211 Quick Installation Guide Administrator Utility Surveillance Software (16 Channels Camera Viewer) You have completed the installation process for RXS-3211’s software.
