Wired Internet Camera RXS-3211 User Manual
Wired Internet Camera RXS-3211 User Manual Content Chapter 1 Knowing your IP Camera..............................................................................3 1.1 Check your package.........................................................................................3 1.2 Basic Information.............................................................................................4 1.3 Product Highlights ...........................................................................................4 1.
Wired Internet Camera RXS-3211 User Manual 3.10 Log ...............................................................................................................48 Chapter 4 Using Surveillance Software.......................................................................50 4.1 Installing Surveillance Software ....................................................................50 4.2 Using Surveillance Software..........................................................................53 4.
Wired Internet Camera RXS-3211 User Manual Chapter 1 Knowing your IP Camera 1.1 Check your package Figure 1.1-1 Item Name Quantity 1 Rosewill RXS-3211 Wired Internet Camera 1 □ 2 5V/1A Power Adapter 1 □ 3 Camera Stand accessory kit Wall Mount Stand 1 □ Wall Anchors 3 □ Screws 3 □ 4 39.
Wired Internet Camera RXS-3211 User Manual 1.2 Basic Information Thank you for purchasing this Internet IP camera! This IP camera is an ideal product for all kinds of video-surveillance purposes, like home/office safety, kid/pet monitoring, and remote video acquire etc. Unlike conventional close-circuit video camera, you’re not limited to the length of cable! Once this IP camera is connected to Internet, you can check video from anywhere in the world where Internet access is available.
Wired Internet Camera RXS-3211 User Manual Configurable motion detection sensitivity (6 levels from most sensitive to least sensitive) with three adjustable areas support. Built-in real-time clock, date and time information will be recorded with every captured picture / video clip (also supports auto time synchronization via network time protocol). Supports up to 4 users login simultaneously, and you can set different password to different user. Usage and event logging. 1.
Wired Internet Camera RXS-3211 User Manual Stand Connector Figure 1.4-2 Rear View WPS Power Jack Reset to Default With 5V DC LAN port Stand Connector: Connects to any standard tripod / camera wall holder. WPS / Reset Button: Press and release this button to activate WPS mode (WPS mode is not available in Wired Camera); press and hold this button for 10 seconds to clear all settings of this camera and return to factory default. Power Jack: Connect to 5V power adapter.
Wired Internet Camera RXS-3211 User Manual 1.6 Camera Hardware Installation Please follow the following instructions to set your IP camera up. 1. Unpack the product package and check if anything missing. 2. Insert supplied LAN cable to “LAN” jack. You can choose to plug the other end onto one of the following: your computer, and your wired or wireless router. Figure 1.6-1 3. Plug the power adapter to wall socket, and connect the power connector to the power jack located at the back of the IP camera.
Wired Internet Camera RXS-3211 User Manual Figure 1.6-2 4. Connect your stand to the connector or place the camera in a secure place, and point the camera to the place you wish to monitor. 1.7 Camera Software Installation Follow the simple steps below to run the Install Wizard to guide you quickly through the Installation process. The following installation is implemented in Windows XP. The installation procedures in Windows 2000/XP/Server 2003/Vista/Win7 are similar. 1.
Wired Internet Camera RXS-3211 User Manual 16 Chan Camera Viewer“. “Install the Administrator Utility” provides the driver and Admin . Administrator Utility helps your computer to search, Utility configure, and view the camera through IE browser. Figure 1.7-1 3. First click “Install Administrator Utility“ and when the following window appears, click “Next”. Figure 1.
Wired Internet Camera RXS-3211 User Manual 4. You can specify the destination folder of software installation; you can just use the default folder, and click “Next” to continue. Figure 1.7-3 5. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, and click “Next” to continue. Figure 1.
Wired Internet Camera RXS-3211 User Manual 6. Here lists all options you chose in previous steps, if everything is correct, click “Install” to start installing procedure, or click “Back” to go back to previous step to modify installing settings. Figure 1.7-5 7. The installing procedure will take some time, please be patient. Figure 1.
Wired Internet Camera RXS-3211 User Manual 8. When you see this window, it means the software installing procedure is complete. Please click “Finish” to finish the procedure (IP camera surveillance software will start after you click “Finish” button, if you want to start it later, uncheck “Launch IP Cam Surveillance Software” box). Figure 1.7-7 9.
Wired Internet Camera RXS-3211 User Manual 10. When the “Administrator Utility” and “Surveillance Software” installed completely. You should see both Icons on your desktop. Administrator Utility Surveillance Software (16 Channels Camera Viewer) You have completed the installation process for RXS-3211’s software. Please follow Chapter 2 for details on Connecting your IP Camera with your computer or router.
Wired Internet Camera RXS-3211 User Manual Chapter 2 Connecting your IP Camera There are two ways to connect up the RXS-3211 IP camera: Connect directly to your computer through LAN port Connect directly to your router or wireless router Connecting Device Computer/Laptop Your wired/wireless router Time to Install Long Short Setup Process See 2.1.1 See 2.1.2 2.1 Camera Installation 2.1.1 IP Camera connects with Computer When connecting the RXH-3111 with your computer directly.
Wired Internet Camera RXS-3211 User Manual Figure 2.1.1-2 3. This window may appear at your Local Area Connection as “Limited or no connectivity”. This is because IP camera cannot assign IP to your computer. Therefore, you will need to manually assign your computer’s IP to connect to the IP Camera. 2.1.1.1 Manually Assign IP for Camera 1. Click “Start” -> “Control Panel” Figure 2.1.1-3 2. Double-click “Network Connections” icon.
Wired Internet Camera RXS-3211 User Manual Figure 2.1.1-4 3. Right-click “Local Area Connection”, and click “Properties” Figure 2.1.
Wired Internet Camera RXS-3211 User Manual 4. Select “Internet Protocol (TCP/IP)”, then click “Properties”. Figure 2.1.1-6 5. In “IP address” field, please fill in any IP address begins with “192.168.2”, and ends with a value greater than 2 and less than 254 (You can use the example in the picture “192.168.2.239”). In Subnet mask field, please fill “255.255.255.0”. Please keep all other fields empty, and click “OK”. Figure 2.1.
Wired Internet Camera RXS-3211 User Manual 6. Open your Internet Explorer and type “http://192.168.2.3” in the address tab. Figure 2.1.1-8 7. You should see a login window popup. The default login name and password is “Admin” and “1234”. (You should change the Login name and password after your first login.) Click “OK” to continue after user name and password has entered. If you cannot login, maybe the password has been modified previously.
Wired Internet Camera RXS-3211 User Manual 2.1.1.2 Install Active X for Camera 1. After logged on, you should see the following messages at the top of Internet Explorer. This will install Active X into your computer. This IP camera requires a special ActiveX control (A.K.A. ‘Plugin’) to work. Please click on the message, and select ‘Install ActiveX Control…’: Figure 2.1.1-10 Figure 2.1.1-11 2. When you’re prompted, click “Install” to continue. Figure 2.1.1-12 3.
Wired Internet Camera RXS-3211 User Manual Figure 2.1.1-13 2.1.2 IP Camera connects with Router/Wireless Router You can also connect the camera through your current router/wireless router. 1. Simply plug your camera onto the current working rouer/wireless router like figure 2.1.2-1. Figure 2.1.2-1 2. After connect, please run the “Administrator Utility” program to search the camera’s IP address.
Wired Internet Camera RXS-3211 User Manual “192.168.2.3” as figure 2.1.2-2. If not, please click “1. Search Camera”, and you should be able to see the IP address of Camera. 3. Once your camera has the IP address, you can continue to view the camera by click on the info bar at “2.”. Figure 2.1.2-2 4. Then click “3. Browse Camera via Web” to view it through your IE browser. You will see a warning window asking if you want to change the setting of the IP. Please click “cancel” to continue. Figure 2.1.
Wired Internet Camera RXS-3211 User Manual operate and manage your camera. Figure 2.1.2-4 Please enter the User name and Password. (Default User name and Password is Admin and 1234) Figure 2.1.2-5 You should see the image from camera now.
Wired Internet Camera RXS-3211 User Manual Chapter 3 Camera’s Management Interface 3.1 Camera Settings The default page after you logged onto web management interface is “Camera”, and this is the page where you can see the real-time image from camera. Figure 3.1-1 You can always come back to this menu by clicking “Camera” on the top of web management interface. Figure 3.
Wired Internet Camera RXS-3211 User Manual Item Video Format Description Specifies video encoding format. You can choose MPEG4 or MJPEG (Motion-JPEG). MPEG4 mode also supports motion detection (see chapter OOXX). Snapshot Take a snapshot picture and save the picture to your computer’s hard drive. Click on directory display and you’ll be prompted to select a folder to save snapshot file. Record Start video recording and save recorded video clip to your computer’s hard drive.
Wired Internet Camera RXS-3211 User Manual Check ‘Enable’ box to enable digital zoom, and you can set the percentage of zoom from 100% (no magnification) to 400%. You can also drag the green square by mouse and put it on the area you wish captured image to be magnified. To exit digital zoom setting, press Fit to Window button. Click this button and captured image will fit to window size. 3.
Wired Internet Camera RXS-3211 User Manual 3.2.1 LAN You can define IP address and select the port number you wish to use here.
Wired Internet Camera RXS-3211 Item Network Type User Manual Description This camera can obtain the IP address from DHCP server automatically (if you have one), or set a fixed IP address. Select “DHCP” to obtain IP address automatically or “Static IP Address” to assign this IP camera with a fixed IP address. When “DHCP” is selected, IP address parameters below will be grayed out. DHCP can apply to most of the cases like connecting with your computer or router/wireless router.
Wired Internet Camera RXS-3211 HTTP Port User Manual Specify the port number of web management interface here. If it’s not 80, you’ll have to add: ”port” after the IP address / hostname of this IP camera. For example, if the HTTP port number you specified here is 90 and the IP address of IP camera is 10.20.20.30, then you have to input “http://10.20.20.30:90” in the address bar of Internet explorer. Click “Apply” to save settings and make the new settings take effect. 3.2.
Wired Internet Camera RXS-3211 User Manual 3.2.3 Dynamic DNS If your ISP does not give you a fixed Internet IP address (i.e. the Internet address you’re using when you access the Internet is not always the same – ask your ISP for detailed information), you can use this function to help you locate the IP address of this IP camera when you’re away from home or office. Before you can use this function, you’ll need to apply for an account at dyndns.org (http://www.dyndns.org).
Wired Internet Camera RXS-3211 User Manual This function is useful and you don’t have to remember the IP address of this IP camera. Simply open “Network neighbor”! Item Description Enable UPnP Select “Enable” to activate UPnP function of this IP camera, select “Disable” to disable it. Click “Apply” to save settings and make the new settings take effect.
Wired Internet Camera RXS-3211 User Manual 3.2.5 LoginFree This function is for user to specify a filename here so everyone who knows this filename can gain access to the picture captured by the IP camera with this name with .jpg file extension. For example, if the filename you specified here is “temp” and your IP camera’s IP address is “192.168.2.3”, then everyone within the network can access to the picture taken by the IP camera at “http://192.168.2.3/temp.jpg”.
Wired Internet Camera RXS-3211 User Manual 3.3.1 Dual Mode IP camera supports two video encoding formats: MPEG4 and MJPEG. You can select the encoding format from one of them. Item Default Video Format Description Specify default video encoding format of this IP camera here. Available options are MPEG4 and MJPEG. Click “Apply” to save settings and make the new settings take effect. 3.3.
Wired Internet Camera RXS-3211 Item User Manual Description Video Resolution Specify video resolution of MPEG4 video encoder. Available options are VGA and QVGA resolution. VGA resolution provides more details than QVGA, but requires more network bandwidth. Video Quality Specify video quality. There are two video quality types: CBR (Constant Bit Rate), and VBR (Variable Bit Rate); CBR: The video bit rate is fixed, you can select a bit rate from dropdown menu.
Wired Internet Camera RXS-3211 Item User Manual Description Video Resolution Specify video resolution of MJPEG video encoder. Available options are VGA, QVGA, and QQVGA resolution. VGA resolution provides more details than QVGA and QQVGA, but requires more network bandwidth. Video Quality Specify video encoding quality of MJPEG video encoder. There are five levels of video quality from highest to lowest. Higher video quality provides better video quality, but requires more network bandwidth.
Wired Internet Camera RXS-3211 User Manual 3.4.1 E-Mail (with Gmail and hotmail setup examples) These settings are used to send the captured picture via Email: Item Recipient E-Mail Address Description Input the email recipient’s Email address here. If you have more than one Email recipient, please use a “;” (semicolon) mark between every Email address. All characters shouldn’t exceed 127 characters. Example of Gmail setup: xxxxx@gmail.
Wired Internet Camera RXS-3211 User Manual Example of hotmail setup: xxxxx@hotmail.com SMTP Server Input the IP address or host name of the SMTP server (the server that delivers the Email for you) here. If you don’t know, please refer to the SMTP server you’re using in your Email software (like Outlook, Outlook Express etc.), or ask your network administrator or ISP. Example of Gmail setup: smtp.gmail.com Example of hotmail setup: smtp.live.com SMTP Port Input mail server’s SMTP port here.
Wired Internet Camera RXS-3211 User Manual ‘Disable’ to disable it. If you don’t know, please refer to the SMTP server you’re using in your Email software (like Outlook, Outlook Express etc.), or ask your network administrator or ISP. Example of Gmail setup: Enable Example of hotmail setup: Enable User Name Please input the user name of SMTP server here, if your SMTP server requires the use of authentication. Example of Gmail setup: xxxxx@gmail.
Wired Internet Camera RXS-3211 User Manual 3.4.2 FTP Configuration Item Description FTP Server Input the IP address or host name of the FTP server you wish to use here. FTP Port Input the port number of the FTP server you wish to use here. User Name Input the user name of the FTP server you wish to use here. Password Input the password of the FTP server you wish to use here. Remote Folder Input the remote folder name on the FTP server here.
Wired Internet Camera RXS-3211 User Manual 3.5 Motion Detection Settings There are two sections of the Motion Detection: Basic Setting and Region Setting. 3.5.1 Motion Detection Basic Setting Motion detection function makes this IP camera become your non-stop guard. You don’t have to waste all the time monitoring the images from the camera, and camera will detect all motions for you. Once motion is detected, a captured snapshot file will be sent to you by Email or via FTP.
Wired Internet Camera RXS-3211 E-Mail Subject User Manual Set the subject of Email being sent here. This will help you to distinguish the Email sent by this IP camera from others. Send snapshot file to Select “Yes” to send a picture to the FTP server you FTP specified in “E-Mail & FTP” menu when a motion is detection, and select “No” to disable this function. Click “Apply” to save settings and make the new settings take effect. 3.5.
Wired Internet Camera RXS-3211 User Manual Motion detection region settings can be found at the bottom of this page: Item Description Region1 / Region2 / Region3 Check the box to enable / disable a certain motion detection area. Sensitivity Control the detection sensitivity of motion detection of respective motion detection region.
Wired Internet Camera RXS-3211 User Manual Item Description Enable FTP Schedule You can select whether to “Enable” or “Disable” sending files to FTP server Time Interval Once you enable the FTP schedule, you can select how often to upload the image file to the server by per frame time or per second frame. File Control You can select to upload by different files with filename composed by date/time or upload the file with same filename to preserve storage space.
Wired Internet Camera RXS-3211 User Manual 3.7.1 Camera Information Camera information allows you to set the name and administrator’s password of this camera. Item Camera Name Description Please specify the name of this IP Camera here. This can be used to identify your camera on the network when you have more than one IP camera in the same network. Default name begins with “IC-“ with the last 6 characters of the MAC address of this IP camera.
Wired Internet Camera RXS-3211 Confirm Password User Manual Please input the same password again, to make sure there’s no typo. Click “Apply” to save settings and make the new settings take effect. 3.7.2 Date / Time Setting This setting allows you to change the date and time of the real time clock in this IP camera. You can set the time manually, or use network time protocol (NTP) to set the time automatically.
Wired Internet Camera RXS-3211 User Manual time setting. Click “Apply” to save settings and make the new settings take effect. 3.7.3 Utilities This menu allows you to upgrade firmware, clear all settings, reboot the camera, and switch LED lights on/off. Item Upgrade Firmware Description If you downloaded latest firmware file from our website, you can click “Browse” button to pick the firmware file you wish to use. Then click “Upgrade” button to start firmware upgrade procedure.
Wired Internet Camera RXS-3211 User Manual in case you don’t want other people know the camera is transferring data. You can click this button again to switch LED lights on again. 3.8 Status This menu provides all information about this IP camera, like firmware version, system uptime, date / time, and network information. You can access this menu by clicking ‘Status’ on the top of web management interface. 3.
Wired Internet Camera RXS-3211 User Manual not change any system setting. When they want to click menus other than “Camera”, they will see the following message informing that they don’t have permission to do that: This IP camera supports setting up to maximum up to total of 16 operators and guests. Note: only one user (including administrator) will be able to view the image of IP camera at the same time. Item Description Login Specify the user name here.
Wired Internet Camera RXS-3211 User Manual Login as Guest: You can select to save the snapshot and record video. Add/Modify/Remove Add: After enter the above info, you can click “Add” to create new account. Modify: You can click your current account to change the Login account name, password, and authority, and then click “Modify” to save. Remove: You can click on your current account, then “Remove” to delete the account. 3.
Wired Internet Camera RXS-3211 User Manual Click “Refresh” to get latest update.
Wired Internet Camera RXS-3211 User Manual Chapter 4 Using Surveillance Software 4.1 Installing Surveillance Software The IP camera surveillance software provides various functions like video recording, after this software is installed, you can use your IP camera to safeguard your property. Please follow the following instructions to install the surveillance software. 1. Double click the setup file located in “xxx” folder in supplied CD-ROM, when the following window appears, click “Next”. 2.
Wired Internet Camera RXS-3211 User Manual 3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, then click “Next” to continue. 4. Here lists all options you chose in previous steps, if everything’s correct, click “Install” to start installing procedure, or click “Back” to go back to previous step to modify installing settings.
Wired Internet Camera RXS-3211 User Manual 5. The installing procedure will take some time, please be patient. 6. When you see this window, it means the software installing procedure is complete. Please click “‘Finish” to finish the procedure (IP camera surveillance software will start after you click “Finish” button, if you want to start it later, uncheck “Launch IPCam Surveillance Software” box).
Wired Internet Camera RXS-3211 User Manual 4.2 Using Surveillance Software You can click ‘IPCam Surveillance Software’ icon from desktop, quick launch bar, or start menu to start the IP camera surveillance software. Before you start: IP camera surveillance software will only work when your monitor’s resolution is ‘1024 x 768’. Please change the resolution before you use IP camera surveillance software, or it won’t start.
Wired Internet Camera RXS-3211 User Manual You can put the mouse cursor on a certain component and see its button name, and here’re detailed descriptions of all buttons: Item Description Video displaying area The image of all connected cameras will be displayed here. Language Select a language from this drop-down menu to change display language. Display layout Change camera image display layout (Click a layout icon to change camera display layout). There are 8 kinds of available display layouts.
Wired Internet Camera RXS-3211 User Manual once to activate scan function (scan icon will become blue ), click again to stop scanning (scan icon will Zoom out become white ). Zoom-out (To see more objects). This function is only available for supported cameras. Zoom In Zoom-in (Too see more details). This function is only available for supported cameras. PTZ control There are 8 directions in PTZ control ring.
Wired Internet Camera RXS-3211 User Manual Minimize window Minimizes IP camera surveillance software window. Video displaying area Displays the image of all cameras by the display layout you selected. 4.3 Configure Surveillance Software 4.3.1 Configure cameras Before you use this IP camera surveillance software, you must configure the camera(s) you wish to connect.
Wired Internet Camera RXS-3211 User Manual 4.3.1.1 “Camera” tab In this tab you can configure all cameras you wish to connect. Up to 16 cameras can be connected simultaneously: Item Description Channel Select the channel number you wish to set. Camera Search All cameras found on your local network will be displayed in “Camera Search” box. Select Select a camera listed in “Camera Search” box, and click “Select” button to fill all parameters of selected camera in every camera configuration fields.
Wired Internet Camera RXS-3211 User Manual IP Input the IP address of camera. Username Input the user name of camera. Web Port Input the web port of the camera. By default it’s “80”. Password Input the password of camera. Default value is “1234”. You should change the password if you changed the password of selected camera. Video Format Select the video encoding format of this camera (MJPEG or MPEG4). Reset Clear all fields in “Camera Configuration” section. OK Save settings in this tab.
Wired Internet Camera RXS-3211 User Manual In “Schedule Recording” tab, provides you options with setup scheduled video recording, you can record the video captured by all cameras at a pre-defined schedule. Item Description Channel Select the channel number you wish to set. One Time Schedules You can specify the one-time schedule for selected camera; this schedule will be executed once only.
Wired Internet Camera RXS-3211 User Manual Please specify the time duration of this one-time schedule (the date and time of “From” and “To”), then click “OK” to save settings. Please note you must set a schedule that will be happened in the future, you can not set a schedule in the past. Edit You can modify a scheduled recording item. Select a schedule in “One Time Schedules” list, and click “Edit” button to edit the start and end time of this schedule. Delete Delete a selected schedule item.
Wired Internet Camera RXS-3211 User Manual in “From” field. You can set the duration of video recording in “Period” field (format is HH:MM:SS), and the end time will be calculated automatically and displayed in “To” field. You can also click “All Time Record” button to define a recording schedule that will be executed every weekday, from 12:00:00AM to 11:59:59PM. Click “OK” to save changes. Edit You can modify a scheduled recording item.
Wired Internet Camera RXS-3211 User Manual Item Description Channel Select the channel number you wish to set. Enable Enable motion record function. Disable Disable motion record function. Recording Time Select the time duration that camera will record when a motion has been detected from dropdown menu in seconds. OK Save settings in this tab. Cancel Discard all settings in this tab. 4.3.
Wired Internet Camera RXS-3211 User Manual Item Data Directory Description Set the directory (folder) you wish to store the recorded video and captured image. You can click “Browse” button to pick a directory in your hard disk. Free Recording Space Displays remaining storage space. Max Video File Size Defines the maximum file size of every video file. When the size of file exceeds this value, IP camera surveillance software will open another file to record the video.
Wired Internet Camera RXS-3211 User Manual 4.3.2.2 “Security” Tab If you don’t want other people to access this IP camera surveillance software, you can set a password to protect it. You’ll need to input the password every time you wish to use this IP camera surveillance software: Item Description Enable Requires password authentication when this software starts. Disable Password authentication is not required when this software starts. Password Input the password you wish to use here.
Wired Internet Camera RXS-3211 User Manual time you use this software: 4.3.2.3 “About” Tab This tab shows the version number of the IP camera surveillance software you are using. 4.
Wired Internet Camera RXS-3211 User Manual Every layout displays different number of camera and camera arrangement, you can click the icon that presents a specific kind of layout, and the video displaying area will change accordingly.
Wired Internet Camera RXS-3211 User Manual 4.5 Full-Screen Mode If you want to use all available spaces on your monitor to display surveillance image, you can click “Full Screen” button to switch display mode to full-screen mode. To exit full-screen mode, press “ESC” key. 4.6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click “Scan” button to switch between all configured cameras.
Wired Internet Camera RXS-3211 User Manual displayed in a scan sequence (you’ll see nothing and you’ll see “Disconnected” text displayed at the upper-left corner of display image). Click ‘Scan’ button once to activate scan function (scan icon will become blue ), click again to stop scanning (scan icon will become white ). 4.
Wired Internet Camera RXS-3211 User Manual Please select a camera in video displaying area by clicking on its image, then click button to see more objects that fall in the scope of camera’s view, or click to enlarge the image size of a certain object to see its detail. 4.8 Snapshot You can take a snapshot of selected camera and save it to ‘Snapshot’ sub-folder of pre-defined data directory.
Wired Internet Camera RXS-3211 User Manual Click snapshot button once to take a snapshot; you can take as much snapshot as you want before hard disk is full. 4.9 Recording You can start video recording of selected camera manually by clicking “Start Recording” button: When recording starts, you’ll see a message displayed in message displaying box like “1/1 10:00:00, Camera 1 Start Manual”, which means camera 1 starts recording manually on 1/1 at 10:00:00.
Wired Internet Camera RXS-3211 User Manual A new window will appear: You have to search the video file before you can play it. There are two kinds of video search: Time Search (search all videos file that falls in a specific period of time) and Motion Search (search all videos recorded by motion detection function and falls in a specific period of time).
Wired Internet Camera RXS-3211 User Manual Chapter 5 Appendix 5.1 Product Specification Product Image Sensor Sensor Dual Mode Internet Camera 0.3Mega pixel CMOS Sensor Resolution 640 x 480 Pixel Fixed Lens Fixed Focus, F=2.8 Viewing Angle Minimum Illumination 55 Degree 1.
Wired Internet Camera RXS-3211 Consumption Dimension Operating Temperature Humidity Certification User Manual 2 Watt (maximum) 92mm x 60mm x 23mm Operation: 0ºC ~45ºC (32ºF ~ 113ºF) Storage : -15ºC ~ 60ºC (14ºF ~ 140ºF) 10~90% (Non-Condensing) FCC Class B, CE Mark 5.2 FAQ / Troubleshooting If the IP camera is not working properly, before you contact the customer service for help, please check the troubleshooting list here, this may help you to solve the problem by yourself and saves your valuable time.
Wired Internet Camera RXS-3211 User Manual f. Contact Rosewill’s customer service for help, if above solutions does not work. 5.2.2 Image refreshes very slow a. Try a higher frame rate setting, if it’s not set to 30. b. Try a lower resolution. c.
Wired Internet Camera RXS-3211 User Manual Internet connection. However, when the network connection is slow, a lower frame rate / resolution setting will help resolve this issue. d. Adjust the antenna if you’re using wireless connection. The antenna should be perpendicular to the ground to get best reception, and the distance between IP camera and computer / wireless access point should not be too far. e. Try to adjust “MTU” setting if you’re using PPPoE to connect to Internet.
Wired Internet Camera RXS-3211 User Manual c. If there’s any light at the place where IP camera is located, switch it on and see if image looks better. 5.2.5 I set the IP camera to send image by Email or FTP, but nothing is received a. If the image is send by Email, please make sure it’s not blocked by any anti-spam mechanism. b. Please make sure you have enough permission for FTP uploading (You can try this by clicking “Upload a test file” button). c.
Wired Internet Camera RXS-3211 User Manual 5.3 Additional Setup guides 5.3.1 Obtain a free Dyndns account to view while away If your ISP is issuing dynamic (non-static) IP address to you and you can’t connect to your IP camera when you’re away from it, you can follow the following steps to obtain a free Dyndns account, which will provide you free IP address to host name mapping service: 1. Launch your web browser and navigate to http://www.dyndns.org 2.
Wired Internet Camera RXS-3211 User Manual 5. When you see this image, you’ll receive an e-mail confirmation at the e-mail box you registered with dyndns.org. 6. Check your e-mail box and you should be able to get confirmation e-mail. Click the link to connect to dyndns.org website and complete registration procedure. If you didn’t get the mail, please re-check the e-mail address, or click “resending it” link in last step.
Wired Internet Camera RXS-3211 User Manual 7. When you see “Account Confirmed” webpage, indicates your dyndns.org account has been confirmed and activated. Now you can click “Create a dynamic DNS host within our Free domains” link to continue. 8. Click “Create Hostname” button.
Wired Internet Camera RXS-3211 User Manual 9. In the “Create Hostname” page: Input the hostname of your choice in “Hostname” field, Select a domain name in dropdown menu, Select “Host with IP address” for “Service Type”, Input current IP address in “IP Address” field (or click the link below to use detected IP address to fill this field). 10. Click “Add to cart” continue. 11. Click “Next” to continue.
Wired Internet Camera RXS-3211 User Manual 12. Click “Activate Services” to continue. 13. When you see this message, indicates your free dyndns.org hostname mapping service has been activated. You can go to chapter 3.2.3 to use your dyndns.org username, password, and hostname + domain name to locate your IP camera on Internet even you’re using dynamic IP address! 5.3.
Wired Internet Camera RXS-3211 User Manual other computers on Internet. The following instruction describes how to configure your router or firewall device so your IPCAM can work with them. These instructions are based on a commonly-available residential router and these setup techniques should be easy to apply on any other similar devices as well. 5.3.2.1 Setup Dyndns Dynamic IP address Mapping 1. Go to your router’s setup page, and locate “DDNS”, “Dynamic DNS”, or similar setup item. 2.
Wired Internet Camera RXS-3211 User Manual 5.3.2.2 Open Ports Required by IP CAM To access IP CAM located behind router or firewall, you must open ports on router or firewall so you can access IP CAM from Internet. 1. Go to your router’s setup page, and locate “NAT”, “Firewall”, “Port Mapping”, “Port Forwarding”, or similar setup item. 2.
Wired Internet Camera RXS-3211 User Manual 3. If IP CAM is the only service you wish to access from Internet, you can also use “DMZ” function to access IP CAM: Simply fill the IP address of IP CAM and you can access IP CAM from the IP address of your router directly. 5.3.3 Using cell phone as IP Camera’s Image Viewer You can use your cellphone to connect to this IP CAM and view captured image. Currently this IP CAM supports iPhone (Apple) and Google Android OS. 5.3.3.1 View through Iphone 1.
Wired Internet Camera RXS-3211 User Manual 4. You’ll see the image of connected camera displayed on upper-left corner of quad-split screen. If you have more than one IP CAM, you can add other 3 IP CAMs to the quad-split screen. Click an unused corner and a yellow square will appear to indicate it’s being marked, then click “Setting”.
