Internal SATA/SAS Hot-Swap Cage 3x 5.25” to 4x 3.5”/2.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual Contents Product Overview 2 Introduction 3 Specification 3 Accessory Bag Detail 3 Installation Guide 4 Hard Drive Tray Assembly / Disassembly 4 Hard Drive Installation 4 Installing a 3.5” HDD 4 Installing a 2.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 Product Overview 2 User Manual
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual Introduction RSV-SATA-Cage-34 is a Hot Swap HDD Cage which converts space of 3x 5.25” CD-rom / DVD-rom to 4x 3.5” or 2.5” SATAI, SATAII, SATAIII, or SAS HDD tray. This cage allows you make better usage of your Server or Case spaces. To use the Hot-Swap feature, Please set motherboard BIOS to AHCI and format the HDD using AHCI.
Internal SATA/SAS Hot-Swap Cage User Manual RSV-SATA-Cage-34 Installation Guide • Hard Drive Tray Assembly / Disassembly 1. Each HDD Tray has a press button for releasing the hinge. To remove the HDD Tray; first press the button. • Hard Drive Installation Installing a 3.5” HDD 1. To install a 3.5” HDD, please make sure that the 3.5” HDD is align with the screw holes on the side of the tray. Then you can fasten all the screws onto the HDD.
Internal SATA/SAS Hot-Swap Cage User Manual RSV-SATA-Cage-34 Installing a 2.5” HDD 1. To install a 2.5” HDD, please make sure that the 2.5” HDD is align with the screw holes on the tray. Then you can fasten all the screws onto the HDD.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual Hot Swap Cage Installation – Case 1. Remove three 5.25” bay covers from the case. 2. Insert the Cage into the slot.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual 3. Secure the Cage with Screws Hot Swap Cage Installation – Server (RSV-L4000 as example) 1. Remove the screws from each side of the Chassis. (two on each side) 2. Once the screws removed, push the top cover to remove from the chassis.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual 3. To remove the cage; first press the two round shape button using your thumbs, then use your index finger to push the 3.5” module to remove it. 4. Pull the module out from the front. 5. Take down the top and bottom Cage rails.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual 6. Place the four rails onto the SATA/SAS Hot-Swap Cage 7. Slide the Cage into the Server Chassis to complete the installation process. Thank you for purchasing a quality Rosewill Product. Please register your product at: www.rosewill.com for complete warranty information and future support for your product. Support: techsupport@rosewill.com Call Center: (800) 575-9885 Web: http://www.rosewill.