Wireless N Adapter RNX-N150UBE User Manual
Wireless N Adapter RNX-N150UBE User Manual FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications.
Wireless N Adapter RNX-N150UBE User Manual required Luxembourg General authorization required for network and service supply(not for spectrum) Norway Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund Russian Only for indoor applications Federation Note: Please don’t use the product outdoors in France.
Wireless N Adapter RNX-N150UBE User Manual Table of Content Chapter 1 Overview ....................................................................................................5 Package Content.................................................................................................5 1.1 Overview of the Product.........................................................................5 1.2 Features....................................................................................................
Wireless N Adapter RNX-N150UBE User Manual Chapter 1 Overview Thank you for choosing Rosewill’s 802.11n Wireless USB adapter – RNX-N150UBE. This chapter is to introduce you more about this Wireless Adapter. Package Content Before getting started, please verify that your package includes the following items: 1. Rosewill 802.11n Wireless USB Adapter x 1 2. 2 dBi detachable Antenna x 1 3. Extended USB Base x 1 4. Quick Installation Guide x 1 5.
Wireless N Adapter RNX-N150UBE 1.2 User Manual Features Complies with IEEE802.11n, IEEE802.11g, IEEE802.11b standards Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption, and 64/128 - bit WEP encryption Supports up to 150Mbps download speed for maximum throughput Ease to configure and provides monitoring information Supports Windows 2000, XP, Vista, 7 Supports WPS 1.3 Product Specification Standard RF Output Power(Typical) IEEE 802.11n and IEEE802.
Wireless N Adapter RNX-N150UBE User Manual Windows OS for Win98SE, ME, 2000, XP, Vista, 7 A CD-ROM Drive USB controller properly installed and working in the computer A 802.11n 、802.11g or 802.11b Wireless Access Point/Router (for infrastructure Mode) or another 802.11n、802.11g or 802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode).
Wireless N Adapter RNX-N150UBE User Manual Chapter 2 Installation Guide 2.1 Software Installation Insert the Driver and Utility CD-ROM into the CD-ROM driver. The Wizard should run automatically, and Figure 2-1 should appear. If not, click the Start button and choose Run. In the field that appears, enter D:\autorun.exe (if ‘’D’’ is the letter of your CD-ROM drive). Figure 2-1 Next we use the USB wireless adapter installation steps as example.
Wireless N Adapter RNX-N150UBE User Manual Figure 2-2 Click Next Figure 2-3 Click Install to start installing 9
Wireless N Adapter RNX-N150UBE User Manual Figure 2-4 Follow the InstallShield Wizard steps, and click Finish when done. Figure 2-5 Now your PC or notebook will restart automatically.
Wireless N Adapter RNX-N150UBE User Manual Chapter 3 Install Wireless Adapter The wireless USB Adapter supports up to 300 Mbps wireless connection. This USB adapter is fully compliant with the specifications defined in IEEE802.11n standard. It is designed to complement USB2.0 computers and supports Windows98SE/Me/2000/XP/Vista. 3.1 USB adapter Installation The status LED indicators of the USB wireless adapter are described in the following.
Wireless N Adapter RNX-N150UBE User Manual Figure 3-2 Now you have completed the driver and hardware installation for the adapter.
Wireless N Adapter RNX-N150UBE User Manual Chapter 4 System Configuration Use the Wireless LAN Utility to check the link information, search for available wireless networks, or create profiles that hold different configuration settings. You can double-click the icon (Figure 4-1) on your desktop to run it. Another way to start the Configuration Utility is to click Start>Programs> 11n USB Wireless LAN Utility> 11n USB Wireless LAN Utility.
Wireless N Adapter RNX-N150UBE User Manual Type: The type of the current wireless connection , Infrastructures or ad hoc Encryption: Current encryption. SSID: The unique name of the wireless network to which the wireless adapter is connecting. Signal Strength: The signal quality of the current connection. Link Quality: The link quality of the current wireless connection. Network Address MAC Address: The MAC Address of the Adapter. IP Address: The IP Address of the Adapter.
Wireless N Adapter RNX-N150UBE User Manual 4.2.1 Add Create a new Infrastructure mode profile If you want your wireless computers to communicate with other computers on your wired network via a wireless access point. Click the Add button to create a new infrastructure profile. Figure 4-4 When the Network Info dialog box appears (Figure 4-4), enter a name for the new profile. Enter the Network SSID.
Wireless N Adapter RNX-N150UBE User Manual Figure 4-6 Choose the Network Authentication Mode and Data encryption from the drop-down menu. And import the network key. Then click OK button. You have successfully created a profile. 4.2.2 Remove Select a profile and click Remove button to delete this profile (Figure 4-7).
Wireless N Adapter RNX-N150UBE User Manual 4.2.3 Edit Select a profile and click Edit button to edit this profile (Figure 4-8). Figure 4-8 Figure 4-9 Modify the profile information according to your demand. 4.2.
Wireless N Adapter RNX-N150UBE User Manual Figure 4-10 Import the new profile name in the popup window blank (Figure 4-11) Figure 4-11 4.2.5 Set default When you want to make one profile as a default wireless connection, you should select the profile and click Set default button. The wireless adapter will use this profile to connect to wireless network automatically when the utility running next time.
Wireless N Adapter RNX-N150UBE User Manual Figure 4-12 4.
Wireless N Adapter RNX-N150UBE User Manual Double-click the network to which you wish to connect. Figure 4-14 Refer to Figure 4-14 choose the Authorization modes and Encryption modes in the drop-down box. If the wireless network uses a Passphrase, enter the Passphrase in the Passphrase field. If the wireless network uses a WEP key, enter the WEP key in the Key field. Click the OK button to complete the network connection. 4.
Wireless N Adapter RNX-N150UBE User Manual Figure 4-15 4.5 Statistics The Statistics tab display the stat. value of current wireless connection Tx and Rx, you can click Reset button to reset value and restart to count.
Wireless N Adapter RNX-N150UBE User Manual 4.6 Wi-Fi Protect Setup Figure 4-17 4.6.1 Method 1 PIN Input Config (PIN) 1.
Wireless N Adapter RNX-N150UBE 2. User Manual Click Pin Input Config(PIN) Figure 4-19 3. Select one WPS AP which you want connect to and click Select button Figure 4-20 4. Please wait when the Figure 4-21 pop-up appear, the secure connection between AP and wireless NIC will be founded automatically.
Wireless N Adapter RNX-N150UBE User Manual 4.6.2 Method 2 Push Button 1. Click Push Button Config(PBC) on Wi-Fi Protect Setup page Figure 4-22 2. Click Start PBC on the AP-Router WPS config page Figure 4-23 3. Please wait when the Figure 4-21 pop-up appear, the secure connection between AP and wireless NIC will be founded automatically.
Wireless N Adapter RNX-N150UBE User Manual If there is more than one AP on the PBC mode, there will be session overlap. Please using method 1 PIN Input Config(PIN) or wait for a while push the button again. FAQ This chapter provides solutions to problems that may occur during the installation and operation of the Wireless USB Adapter. Read the descriptions below to solve your problems. 1. The Wireless USB Adapter does not work properly. Reinsert the Wireless USB Adapter into your PC’s USB slot.
Wireless N Adapter RNX-N150UBE User Manual configuration. 3. What should I do when the computer with the Adapter installed is unable to connect to the wireless network and/or the Internet? Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may be a problem with the broadband connection. Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC power and Ethernet cables are firmly connected.
