Wireless N Adapter RNX-N250PCe Quick Installation Guide
Wireless N Adapter RNX-N250PCe Quick Installation Guide 1 Package Contents Before getting started, please verify that your package includes the following items : 1. Rosewill RNX-N250PCE Wireless N Adapter x 1 2. 5 dBi Antenna x2 3. Low Profile Bracket x1 4. Quick Installation Guide x1 5. Resource CD x1, including : Rosewill Wireless N Utility and Driver User Manual Make sure that the package contains above items. If any of the listed items is damaged or missing, please contact with your distributor.
Wireless N Adapter RNX-N250PCe Quick Installation Guide 3 System Requirement You must have at least the following ● A desktop PC with an available working PCI-Express slot ● At least a 300MHz processor and 32MB of memory ● Windows OS for Win98SE, ME, 2000, XP, Vista, Win7 ● A CD-ROM Drive ● A 802.11n 802.11g or 802.11b Wireless Access Point/Router (for infrastructure Mode) or another 802.11n802.11g or 802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode).
Wireless N Adapter RNX-N250PCe Quick Installation Guide ► Click Next ► Click Install 3
Wireless N Adapter RNX-N250PCe Quick Installation Guide ► Click Finish to finish the driver installation 4.2 Hardware installation of the Wireless PCI-E Adapter 4.2.1 Install the Wireless 11N PCI-E adapter into your computer ● Make sure to turn off your computer and unplug the power cord. Remove the back cover of the computer.
Wireless N Adapter RNX-N250PCe Quick Installation Guide 4.2.2 Restart your computer Turn on the computer, the Found New Hardware Wizard (windows XP) screen will appea r: ► Select Install the software automatically (Recommended) and then click Next ► Click Finish to finish the hardware installation The installation is completed.
Wireless N Adapter RNX-N250PCe Quick Installation Guide 5 Connecting to a wireless network 5.1 Connecting with Microsoft Zero Configuration tool (Win XP) After specifying the Microsoft Zero Configuration tool to configure your wireless network, right click on the icon on system tray. Select “View Available Wireless Networks” to specify your wireless network. The tool shows the available wireless networks. Select your demanding network to connect with.
Wireless N Adapter RNX-N250PCe Quick Installation Guide Click Refresh to get an update of your Wireless Network Connection. This should help you search the SSID of the network you want to connect to. Select your desired SSID, then Click “Connect”. You will be prompt to ask you entering the network security key. Once entered, please click OK to complete.
Wireless N Adapter RNX-N250PCe Quick Installation Guide You should see below in a very short period and find out whether you are connected or now. 6 FAQ This chapter provides solutions to problems that may occur during the installation and operation of the Wireless USB Adapter. Read the descriptions below to solve your problems. 1. I cannot communicate with the other computers linked via Ethernet in the Infrastructure configuration. Make sure that the PC to which the Adapter is associated is powered on.
Wireless N Adapter RNX-N250PCe Quick Installation Guide In Ad-Hoc mode, both wireless clients will need to have the same SSID. Please note that it might be necessary to set up one client to establish a BSS (Basic Service Set) and wait briefly before setting up other clients. This prevents several clients from trying to establish a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple clients associated to it.
