User manual

VCDS - Measuring Blocks - Section 7-A
(VAG 1551/1552 function 08)
On this screen, you can read all sorts of data from the Control Module in real-time.
Use [Up] and [Dn] to scroll through the available groups (000 - 255 on most Control
Modules) and you can view up to three groups at the same time. Don't become
discouraged when you find some that say "ERROR: Group xxx Not Available" or if you find
some groups where the fields are all blank. Most 1996 and newer ECU's have Groups in
the 200 range, but there are often "gaps" in the numbers.
You can also type a Group number into any or all of the Group boxes and click [Go!]
Dual ECU's: For vehicles with dual ECU's (like the Audi R8), data from both ECUs can be
viewed simultaneously by accessing [31-Engine Other] as shown here: