User manual

VCDS - Advanced Measuring Values - Section 13-A
This function expands on the Measuring Blocks function and lets you select up to 12
measuring values from as many as 12 different groups from a selection dialog that shows
the contents of the measuring values. This function is available only when a label file exists
for the control module being accessed. For controllers using the UDS/ODX/ASAM protocol,
the Measuring Blocks function is not available and you MUST use Advanced Measuring
Blocks instead. For UDS controllers, the “Group UDS requests” checkbox can speed up
sample rates.
Warning!
If you wish to observe real-time data while
driving the car, please use a second
person! Let one drive while the other
observes the data, making sure the person
holding the PC is not in front of an active
airbag!
Note: You may also want to try the
Measuring Blocks function, which accesses
the same data but in a different format.
(see Section 7 of this manual).
The Advanced Measuring Values function
has two screens, the main one shown
above and the Item Selection Window
shown to the right. Check each value you
would like to show and uncheck each that
you would like to remove. Use the data
entry box on top to filter only the items
containing the word you enter such as
“fuel” shown here. Use the [Clear] button
to remove the filter. ►