User manual

VCDS – SRI Reset- Section 22-A
The [SRI Reset] function is used to reset the Service Reminder in vehicles so equipped.
The function will automatically access the Instrument Cluster and will retrieve SRI
instructions from the Label File as well as current values stored in the Cluster. New values
can be entered by hand, or the user can select the drop-down list to choose from a number
of functions which will load standard value sets.
Models using flexible service intervals may show "---" as values for the time/distance to the
next service in the instrument cluster. This is not an error. The system requires a certain
time/distance to calibrate itself to show meaningful values, usually this takes about 300
miles or 500 km.
In many newer Audi models (2008 onward), the default "Simple Service Reset" or "Basic
Service Reset" choice cannot be used. Instead, you must pick the appropriate choice for
your region, for example "#2 Mileage based Service Reset (USA)".
On the latest cars using UDS/ODX diagnostic protocols for the Instrument Cluster, the SRI
Reset function does not apply. Instead, SRI must be reset by saving the appropriate
Adaptation values directly in the Instrument Cluster. Please check the Ross-Tech Wiki for
instructions and contact Ross-Tech via email if you need assistance with this function.
This page contains an example of SRI Reset in a UDS Cluster (in a Mk6 Golf)
http://wiki.ross-
tech.com/wiki/index.php/VW_Golf/Golf_Plus_(5K/52)_Instrument_Cluster