User Manual

Not all patterns can be rotated.
13.
Use the HMult knob to multiply the pattern
horizontally.
14.
Use the VMult knob to multiply the pattern
vertically.
To Apply a Border to a Pattern
1.
Press WIPE > NEXT > NEXT.
2.
Use the Border knob to adjust the size of the border
around the pattern.
3.
Use the Soft knob to adjust the softness of the
pattern border.
4.
Press NEXT.
5.
Select a default or custom color for the border.
•
Default — use the Load knob to select a preset
color for the border.
•
Custom — press NEXT and use the BHue,
BSat, and BLum knobs to select your own
color.
DVE Transitions
A DVE transition is a gradual transition where one video
signal is replaced with another according to a 2D DVE
pattern.
Keep the following in mind when performing DVE
transitions:
• You must include the background when performing
a DVE transition on a Chroma Key, Self Key, or
Auto-Select Key. If you do not include the
background, a dissolve transition is performed.
• Performing a DVE transition on a DVE Key without
including the background scales the transition effect
to the size of the DVE Key. This transition does not
consume an additional DVE resource.
• Performing a DVE transition on a DVE Key with the
background included does not scale the transition
effect. This transition consumes the second DVE
resource.
To Set Up a DVE Transition
A DVE transition requires that you select the DVE
pattern and duration for the transition.
1.
Press DVE.
Tip: You can use the same procedure for a MiniME
™
or
MultiScreen.
2.
Use the Time knob to set the length of the
background transition.
3.
Use the Dirctn knob to select the direction that the
wipe travels.
4.
Press the Dirctn knob to select whether the wipe
runs forward during the rst transition and then
reverse during the second (FF), or if it always goes
in the same direction.
5.
Press NEXT.
6.
Use the Effect knob to select the DVE pattern you
want to use. You can also select most of the patterns
by pressing, or double-pressing, the pattern button
directly.
•
PushL — Push Left (0)
•
PushR — Push Right (double-press 0)
•
PushU — Push Up (1)
•
PushD — Push Down (double-press 1)
•
SqzHor — Squeeze Horizontally (2)
•
SqzVert — Squeeze Vertically (3)
•
SqzCtr — Squeeze to the Center (7)
•
PushUL — Push to Upper-Left (4)
•
PushUR — Push to Upper-Right (double-press
2)
•
PushDL — Push to Lower-Left (double-press
3)
•
PushDR — Push to Lower-Right (double-press
4)
•
SqzUR — Squeeze to Upper-Right (5)
•
SqzUL — Squeeze to Upper-Left (6)
•
SqzDR — Squeeze to Lower-Right
(double-press 6)
•
SqzDL — Squeeze to Lower-Right
(double-press 5)
•
CirclL — Circle Left (8)
•
CirclR — Circle Right (double-press 8)
•
FlyTru — Fly Through (double-press 7)
•
Strtch — Stretch Horizontally to Black (9)
•
Tumble — Tumble Down (double-press 9)
•
1000lb — Falls and then Bounces
•
SqzU — Squeeze Up
•
SqzD — Squeeze Down
•
SqzL — Squeeze Left
•
SqzR — Squeeze Right
MediaWipe Transitions
A MediaWipe allows you to use an animation to cover
a transition. When the transition starts, the switcher plays
the selected animation over top of the background and
keys that are being transitioned. A MediaWipe can be
used to cover a cut, dissolve, wipe, or DVE transition.
24 • Transitions — Carbonite Black Solo Operation Manual (v1.2)