User Manual

Europe
This equipment is in compliance with the essential
requirements and other relevant provisions of CE
Directive 93/68/EEC.
International
This equipment has been tested to CISPR 22:1997 along
with amendments A1:2000 and A2:2002, and found to
comply with the limits for a Class A Digital device.
Important: This is a Class A product. In domestic
environments, this product may cause radio
interference, in which case the user may have to take
adequate measures.
General Handling Guidelines
• Careful handling, using proper ESD precautions, must
be observed.
• Power down the system before PCB removal.
A Word About Static Discharge
Throughout the many procedures in this manual, please
observe all static discharge precautions.
Caution: Avoid handling the switcher circuit boards
in high static environments such as carpeted areas,
and when synthetic fiber clothing is worn. Touch the
frame to dissipate static charge before removing
boards from the frame, and exercise proper grounding
precautions when working on circuit boards. Exercise
proper grounding precautions when working on circuit
boards.
Warranty and Repair Policy
Ross Video Limited (Ross) warrants its switchers and
related options, to be free from defects under normal use
and service for a period of ONE YEAR from the date of
shipment. Fader handle assemblies are warranted for the
life of the product. If an item becomes defective within
the warranty period Ross will repair or replace the
defective item, as determined solely by Ross.
Warranty repairs will be conducted at Ross, with all
shipping FOB Ross dock. If repairs are conducted at the
customer site, reasonable out-of-pocket charges will
apply. At the discretion of Ross, and on a temporary loan
basis, plug in circuit boards or other replacement parts
may be supplied free of charge while defective items
undergo repair. Return packing, shipping, and special
handling costs are the responsibility of the customer.
Software upgrades for switchers may occur from time to
time, and are determined by Ross Video. The upgrades
are posted on the Ross Video website, and are free of
charge for the life of the switcher.
This warranty is void if products are subjected to misuse,
neglect, accident, improper installation or application,
or unauthorized modication.
In no event shall Ross Video Limited be liable for direct,
indirect, special, incidental, or consequential damages
(including loss of prot). Implied warranties, including
that of merchantability and tness for a particular
purpose, are expressly limited to the duration of this
warranty.
This warranty is TRANSFERABLE to subsequent
owners, subject to Ross Video's notication of change
of ownership.
Environmental Information
The equipment that you purchased required the
extraction and use of natural resources for its
production. It may contain hazardous substances that
could impact health and the environment.
To avoid the potential release of those substances into
the environment and to diminish the need for the
extraction of natural resources, Ross Video encourages
you to use the appropriate take-back systems. These
systems will reuse or recycle most of the materials from
your end-of-life equipment in an environmentally friendly
and health conscious manner.
The crossed-out wheeled bin symbol invites you to use
these systems.
If you need more information on the collection, reuse,
and recycling systems, please contact your local or
regional waste administration.
You can also contact Ross Video for more information
on the environmental performances of our products.
Company Address
Ross Video Limited — 8 John Street Iroquois, Ontario,
Canada, K0E 1K0
Ross Video Incorporated — P.O. Box 880, Ogdensburg,
New York, USA, 13669-0880
([phone]General Business
Ofce:
([phone]Fax:
([phone]Technical
Support:
Carbonite Black Solo Operation Manual (v1.2) — Document Information • 5