User Manual

Tip: Any of the user select buttons can be assigned as a
cc bank select button.
3.
Select the custom control you want to run by
pressing the source button on the custom control
bus.
The custom control starts to play immediately.
Editing a Custom Control
After you have recorded a custom control, you can go
back and edit that custom control to add or remove
events.
Tip: Custom controls can also be edited from the Custom
Control node in DashBoard.
To Edit a Custom Control
When editing a custom control, you can delete and insert
events at any point in the custom control, or append
events to the end.
Tip: When editing a custom control, press RUN EVENT to run
the currently selected event. This can help you diagnose
problems in a custom control.
1.
Press MENU > BANK 1 > EDIT.
2.
Use the Bank knob to select the bank that the
custom control you want to record will be stored on,
or select the bank button directly.
3.
Use the CC knob to select the custom control that
you want to edit, or select the custom control on the
bus directly. The custom control will have an * next
to the number.
4.
Use the Func knob to select where and how you
want to edit the custom control.
•
Edit — select the position in the custom control
to edit events
•
Append — add events to the end of the custom
control
5.
Press the Func knob to start editing.
Tip: You can also start editing a custom control by pressing
and holding EDIT and selecting the bank and custom that
you want to edit to.
The display changes to show the name and duration
of the custom control, and the currently selected
event in the custom control.
6.
Delete an event in a custom control as follows:
a)
Use the left knob to select the event you want
to delete. You can also use the PREV and
NEXT buttons.
b)
Press DELETE.
7.
Insert an event into a custom control as follows:
a)
Use the left knob to select the event you want
to insert an event before. You can also use the
PREV and NEXT buttons.
b)
Press INSERT.
c)
Insert the events you want.
d)
Press START/STOP to nish recording.
To Edit a CC From DashBoard
When editing a custom control, you can delete and insert
events at any point in the custom control, or append
events to the end.
Tip: When editing a custom control, press Run Event to run
the currently selected event. This can help you diagnose
problems in a custom control.
1.
Click Navigation Menu > Custom Control >
Editor (Beta).
2.
Click Bank X to select the bank that the custom
control you want to edit is on.
3.
Click the custom control that you want to edit.
4.
Click the event that you want to edit or insert an
event before.
Refer to Custom Control Events on page 51 for
information on available events.
5.
Edit the custom control or event.
•
Append (Record) — start inserting events to
the end of the custom control
•
Append — insert the current event at the end
of the custom control
•
Copy — copy the entire custom control
•
Delete — delete the entire custom control
•
Delete Event — delete the currently selected
event
•
Edit Event — edit the parameters of the
currently selected event
•
Insert (Record) — start insert events after the
currently selected event
•
Insert — insert the current event after the
currently selected event
•
Record — start recording a new custom control
over the existing one
•
Run Event — run the currently selected event
Custom Control Events
The Custom Control editor in DashBoard allows you to
add or edit events in custom controls.
Carbonite Black Solo Operation Manual (v1.2) — Custom Controls • 51