User Manual

DescriptionLocationEvent
Select the clean feed location for the
selected ME.
Switcher
Installation >
ME > ME Clean
Feed
Clean Feed
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click a Before Keyer button to
select whether you want the
clean feed output to be taken
before key 1 (Keyer 1), key 2
(Keyer 2), or key 3 (Keyer 3).
Configures the next transition area of
the selected ME, MiniME
™
, or
Switcher >
Transition >
ME Trans
Trans Clear
MultiScreen to take all keys off-air with
the next transition.
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Action button and
select Trans Clear.
Select whether color framing for the
reference outputs is synchronized.
Switcher
Installation >
Reference >
Color Framing
Color Framing
1. Click a Framing button to select
whether color framing is
synchronized (Sync) or not
(NoSync).
Performs a cut on the selected ME.Switcher >
Transition >
ME Trans
Cut
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Action button and
select Cut.
Turn the DVE freeze feature on or off
for the selected key for the selected
ME, MiniME
™
, or MultiScreen.
Switcher >
Keyer > DVE
Freeze
DVE Freeze
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Value button and select
whether to freeze the video and
appearance of a key (On) or not
(Off). When a key is frozen, the
DVE attribute are disabled and
you can not move the key.
Select the aspect ratio for the DVE key
on the selected key for the selected
ME.
Switcher >
Keyer > DVE
Param
DVE Key Aspect
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
DescriptionLocationEvent
3. Click the Parameter button and
select Aspect.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter an aspect ratio in the
Value (%) field.
Select the custom color you want to
apply to the border of the DVE key of
Switcher >
Keyer > DVE
DVE Key Border
Color (HSL)
the selected ME, MiniME
™
, orBorder Color
(HSL) MultiScreen. Each component of the
HSL color must be inserted
individually.
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Component button and
select the HSL component you
want to assign a value to. A
value should be applied to all
three components.
5. Enter a value for the selected
component in the Value (%)
field.
Select the preset color you want to
apply to the border of the DVE key of
Switcher >
Keyer > DVE
DVE Key Border
Color (Preset)
the selected key for the selected ME,
MiniME
™
, or MultiScreen.
Border Color
(Preset)
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Color button and select
the preset color you want to
apply to the border.
Select the size of border for the DVE
key on the selected key for the
selected ME.
Switcher >
Keyer > DVE
Param
DVE Key Border
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Parameter button and
select Border.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
Carbonite Black Solo Operation Manual (v1.2) — Custom Controls • 53