User Manual

DescriptionLocationEvent
Select the video source you want to
capture for the selected Media-Store
channel.
Switcher >
MediaStore >
Media Capture
Source
Media-Store —
Capture Source
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click Source and select the
video source that you want to
capture.
Clear the selected Media-Store
channel.
Switcher >
MediaStore >
Channel
Action
Media-Store —
Clear Channel
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click Clear Channel.
Select the point, in frames, from the
start of the animation that the
Switcher >
MediaStore >
Attributes
Media-Store — Cut
Frame
MediaWipe background cut occurs for
the selected Media-Store channel.
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Parameter button and
select Cut Frame.
4. Enter the frame in the animation
that you want to cut to occur for
the MediaWipe in the Value
field.
Delete a captured still.Switcher >
MediaStore >
Media-Store —
Delete Capture
1. Enter the number of the capture
file you want to delete in the
Capture File field.
Delete Media
Capture
Load a media item into the selected
Media-Store channel.
Switcher >
MediaStore >
Load
Media-Store Load
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Location button to
select whether the media item
you want to load is located on
the internal storage (Internal) or
on the USB (USB).
3. Enter the number of the media
item you want to load in the
Media Number field.
Select whether an animation will loop
at the end for the selected Media-Store
channel.
Switcher >
MediaStore >
Attributes
Media-Store —
Looping
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
DescriptionLocationEvent
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Parameter button and
select Looping.
4. Click the Value button and select
whether the animation loops at
the end (On) or not (Off).
Move to a specific frame in the media
item for the selected Media-Store
channel.
Switcher >
MediaStore >
Attributes
Media-Store —
Move To Frame
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Parameter button and
select Move To Frame.
4. Enter the frame that you want to
jump to in the media item in the
Value field.
Select whether the associated audio
is turned on or off during playback for
the selected Media-Store channel.
Switcher >
MediaStore >
Attributes
Media-Store —
Mute
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Parameter button and
select Mute.
4. Click the Value button and select
whether the audio plays (On) or
not (Off).
Start an animation playing for the
selected Media-Store channel.
Switcher >
MediaStore >
Channel
Action
Media-Store —
Play
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click Toggle Play.
Select the speed for an animation to
play at on the selected Media-Store
channel.
Switcher >
MediaStore >
Playback
Speed
Media-Store —
Play Speed
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Parameter button and
select Playback Speed.
62 • Custom Controls — Carbonite Black Solo Operation Manual (v1.2)