User Manual

DescriptionLocationEvent
4. Enter the speed, faster or slower
than 100%, that you want the
animation to play at in the Value
(%) field.
Reset the selected Media-Store
channel.
Switcher >
MediaStore >
Channel
Action
Media-Store —
Reset Media
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click Reset Media.
Select whether an animation plays in
reverse for the selected Media-Store
channel.
Switcher >
MediaStore >
Attributes
Media-Store —
Reverse
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Parameter button and
select Reverse.
4. Click the Value button and select
whether the animation plays in
reverse (On) or not (Off).
Rewind an animation to the first frame
for the selected Media-Store channel.
Switcher >
MediaStore >
Channel
Action
Media-Store —
Rewind
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click Move to Frame 1.
Select whether the alpha of the media
item should be shaped or ushaped for
the selected Media-Store channel.
Switcher >
MediaStore >
Attributes
Media-Store —
Shaped
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Parameter button and
select Shaped.
4. Click the Value button and select
whether the alpha of the media
item is shaped (On) or not (Off).
Select the GPI output that you want to
trigger with a MediaWipe for the
selected Media-Store channel.
Switcher >
MediaStore >
Attributes
Media-Store —
Trigger GPI Output
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
DescriptionLocationEvent
will not be available when you
reset the parameter.
3. Click the Parameter button and
select GPO.
4. Enter the GPI output that you
want to trigger with the
MediaWipe in the Value field.
Select the time from the start of the
MediaWipe that the GPI output is
Switcher >
MediaStore >
Attributes
Media-Store —
Trigger GPI Output
Delay triggered for the selected Media-Store
channel.
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Parameter button and
select GPO Frame.
4. Enter the delay, in frames, for
the GPI output to be triggered in
the Value (fr) field.
Select the x-axis position for the media
item for the selected Media-Store
channel.
Switcher >
MediaStore >
Attributes
Media-Store —
X-Position
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Parameter button and
select X-Pos.
4. Enter a new position in the
Value field.
Select the y-axis position for the media
item for the selected Media-Store
channel.
Switcher >
MediaStore >
Attributes
Media-Store —
Y-Position
1. Click the MediaStore Channel
button for the Media-Store
channel you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Parameter button and
select Y-Pos.
4. Enter a new position in the
Value field.
Select which Media-Store channel will
be used for the MediaWipe transition
of the selected ME.
Switcher >
Transition >
Media Wipe
Channel
MediaWipe —
Channel
1. Click the ME button for the ME
that you want to perform the
event on.
Carbonite Black Solo Operation Manual (v1.2) — Custom Controls • 63