User Manual

DescriptionLocationEvent
2. Click M1 or M2 to assign that
Media-Store channel to the
MediaWipe.
Select whether the MediaWipe
reverses direction for every second
transition of the selected ME.
Switcher >
Transition >
Media Wipe
Direction
MediaWipe —
Direction, Flip-Flop
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click Flip-Flip.
4. Click the Value button and select
whether Flip-Flop is on (On) or
not (Off).
Select the direction for the MediaWipe
transition of the selected ME.
Switcher >
Transition >
Media Wipe
Direction
MediaWipe —
Direction
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click Direction.
4. Click the Value button and select
whether the MediaWipe moves
in a forward (Forward) or
reverse (Reverse) direction.
Recall a memory for the selected ME,
MiniME
™
, or MultiScreen.
Switcher >
Memory Recall
Memory Recall
1. Click the Include button and
select all the locations that you
want to perform the memory
recall on.
2. Click the Bank button and select
the bank that you want to recall
the memory on.
3. Click the Memory button and
select the memory that you want
to recall.
Set or reset the background transition
rate of the selected ME, MiniME
™
, or
MultiScreen.
Switcher >
Transition >
ME Trans Rate
ME Trans Rate
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Enter a new transition rate, in
frames, in the Value (fr) field.
DescriptionLocationEvent
Select the transition type for a
background transition of the selected
ME, MiniME
™
, or MultiScreen.
Switcher >
Transition >
ME Trans Type
ME Trans Type
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Type button for the
type of transition you want to
use.
Select whether edge blending is
applied to the edges of the overlapping
edges for the selected MultiScreen.
Switcher
Installation >
MultiScreen >
Edge
Properties
MultiScreen —
Edge Blending
1. Click the ME button for the
MultiScreen that you want to
perform the event on.
2. Click the Parameter button and
select Blending.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Edge button and select
the edge that you want to adjust.
5. Click the Value button and select
whether blending is applied edge
(On) or not (Off).
Select the distance between screens
for the selected MultiScreen.
Switcher
Installation >
MultiScreen >
MultiScreen —
Edge Distance
1. Click the ME button for the
MultiScreen that you want to
perform the event on.
Edge
Parameters
2. Click the Parameter button and
select Distance.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Edge button and select
the edge that you want to adjust.
5. Enter the distance between the
screens on the selected edge in
the Value (%) field.
Select the amount of gamma
correction applied to the overlapping
edges for the selected MultiScreen.
Switcher
Installation >
MultiScreen >
Edge
Parameters
MultiScreen —
Edge Gamma
1. Click the ME button for the
MultiScreen that you want to
perform the event on.
2. Click the Parameter button and
select Gamma.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Edge button and select
the edge that you want to adjust.
5. Enter the amount of gamma
correction in the Value (%) field.
64 • Custom Controls — Carbonite Black Solo Operation Manual (v1.2)