User Manual

DescriptionLocationEvent
from the switcher (Switcher), the
router (Router), or both are
shown (Both).
Select the position of the source label
for the selected box on the selected
MultiViewer.
MultiViewer >
Box > MV Box
Label Position
MultiViewer Box —
Label Position
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click the Box button and select
the box that you want perform
the event on.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click a Value button and select
whether the label on the selected
box is at the top (Top) or bottom
(Bottom).
Select transparency for the
background behind the source labels
on the selected MultiViewer.
MultiViewer >
MV Label
Transp
MultiViewer Box —
Label
Transparency
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Enter the amount of
transparency in the Value (%)
field.
Select whether the MultiScreen overlay
is shown for the selected box on the
MultiViewer >
Box > MV Box
MultiViewer Box —
MultiScreen
Markers selected MultiViewer. The overlay
shows what portions of the image are
MultiScreen
Marker
cropped out to fit into the output of the
MultiScreen.
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click the Box button and select
the box that you want perform
the event on.
3. Click the ME button and select
the MultiScreen you want to
view.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Click a Value button and select
whether the overlay is shown
(On) or not (Off).
DescriptionLocationEvent
Select whether a red (on-air) tally is
shown for the selected box on the
selected MultiViewer.
MultiViewer >
Box > MV Box
On-Air Tally
MultiViewer Box —
Red Tally (On-Air)
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click the Box button and select
the box that you want perform
the event on.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click a Value button and select
whether a red tally is shown on
the selected box (On) or not
(Off).
Assign a source to one of the boxes
on the selected MultiViewer.
MultiViewer >
Box > MV Box
Source
MultiViewer Box —
Video Source
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click the Box button and select
the box that you want perform
the event on.
3. Click the Value button and select
the source that you want to
assign to the box.
Select the amount of clipping to be
applied to the overlay source on the
selected MultiViewer.
MultiViewer >
MV Keyer Clip
MultiViewer — Clip
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Enter the amount of clipping to
be applied in the Value field.
Select a preset color for the
background of the clock on the
selected MultiViewer.
MultiViewer >
Clock > MV
Clock (Preset
Color)
MultiViewer Clock
— Background
Color (Preset)
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click Background.
3. Click the Color button and select
the color you want to use.
Select the custom color for the lettering
of the clock on the selected
MultiViewer.
MultiViewer >
Clock > MV
Clock (HSL
Color)
MultiViewer Clock
— Foreground
Color (HSL)
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click the Clock Area button and
select Foreground.
66 • Custom Controls — Carbonite Black Solo Operation Manual (v1.2)