User Manual

DescriptionLocationEvent
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Component button and
select the HSL component you
want to assign a value to. A
value should be applied to all
three components.
5. Enter a value for the selected
component in the Value (%)
field.
Select a preset color for the lettering
of the clock on the selected
MultiViewer.
MultiViewer >
Clock > MV
Clock (Preset
Color)
MultiViewer Clock
— Foreground
Color (Preset)
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click Foreground.
3. Click the Color button and select
the color you want to use.
Select the hour format for the clock on
the selected MultiViewer.
MultiViewer >
Clock > MV
Clock Format
MultiViewer Clock
— Format
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click a Value button and select
whether the clock shows 24-hour
(24-Hours), 12-hour with am/pm
(12-Hour AM/PM), or simple
12-hour (12-Hour) clock.
Select whether the clock shows
timecode or system time on the
selected MultiViewer.
MultiViewer >
Clock > MV
Clock Mode
MultiViewer Clock
— Mode
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click a Clock Mode button and
select whether the clock shows
timecode (Timecode), system
time (System), or is off (Off).
Select the size of the cock on the
selected MultiViewer.
MultiViewer >
Clock > MV
Clock Param
MultiViewer Clock
— Size
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click Clock Size.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Enter the size of the clock in the
Value (%) field.
Select whether number of frames for
a timecode are shown on the selected
MultiViewer.
MultiViewer >
Clock > MV
Clock Frame
Count
MultiViewer Clock
— Timecode Frame
Count
1. Click a MultiViewer button to
select which MultiViewer you
DescriptionLocationEvent
want that you want to perform
the event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click a Value button and select
whether the frame count is
shown (On) or not (Off).
Select the horizontal position of the
cock on the selected MultiViewer.
MultiViewer >
Clock > MV
Clock Param
MultiViewer Clock
— X-Position
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click Clock X-Pos.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Enter the horizontal position of
the clock in the Value (%) field.
Select the custom color for the
background of the clock on the
selected MultiViewer.
MultiViewer >
Clock > MV
Clock (HSL
Color)
MultiViewer
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click the Clock Area button and
select Background.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Component button and
select the HSL component you
want to assign a value to. A
value should be applied to all
three components.
5. Enter a value for the selected
component in the Value (%)
field.
Select whether FSFC is shown on the
label on the selected MultiViewer when
a source has an FSFC applies to it.
MultiViewer >
MV FSFC Label
MultiViewer —
FSFC Label
1. Click a MultiViewer button to
select which MultiViewer you
want that you want to perform
the event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click a Value button to select
whether FSFC is shown on the
label (On) or not (Off).
Carbonite Black Solo Operation Manual (v1.2) — Custom Controls • 67