User Manual

DescriptionLocationEvent
Send the Swap command to the
selected device.
Devices >
RossTalk
RossTalk — Swap
Current
1. Click Swap.
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
Send the Swap command for a specific
location to the selected device.
Devices >
RossTalk
RossTalk — Swap
1. Click Swap (2).
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
3. Enter the framebuffer that you
want to swap the items on in the
Channel field.
4. Enter the layer that you want to
swap the items on in the Layer
field.
Send the Take command to the
selected device.
Devices >
RossTalk
RossTalk — Take
Current
1. Click Take.
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
Send the Take command for a specific
item and location to the selected
device.
Devices >
RossTalk
RossTalk — Take
1. Click Take (3).
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
3. Enter the take item id of the item
you want to take in the Take ID
field.
4. Enter the framebuffer that you
want to take the item on in the
Channel field.
5. Enter the layer that you want to
take the item on in the Layer
field.
Send the Take Off command for a
specific item to the selected device.
Devices >
RossTalk
RossTalk — Take
Off
1. Click Take Offline.
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
3. Enter the take item id of the item
you want to take in the Take ID
field.
Load the custom reset settings for the
selected ME, MiniME
™
, or
MultiScreen.
Switcher >
Load RState
RState, Load
1. Click the Include button and
select all the locations that you
want to recall the custom reset
settings on.
DescriptionLocationEvent
Delete an entry from the substitution
table.
Switcher
Installation >
Source
Source
Substitution,
Delete
1. Click the Source button and
select the source that you want
Substitution >
Delete Subst
Table
to delete the substitution(s) for.
If more than one substitution
entry exists for the selected
source, all those entries will be
deleted.
Set a source substitution for the
substitution table.
Switcher
Installation >
Source
Source
Substitution
1. Click the Source button and
select the source that you want
to set a substitution for.
Substitution >
Source ME
Sub
2. Click the ME button and select
the MiniME
™
that you want to
assign a substitution source to.
3. Click the Subst button and
select the source you want to
substitute for the selected
source.
Insert the current state of the switcher
into the custom control.
Special > StateState, Insert
1. Click State Attributes and
select the elements that you
want to include in the state of the
switcher when it is stored to the
custom control.
Select the field that a video transition
will be performed on.
Switcher
Installation >
Field Switch
Switching Field
1. Click a Switch Field button to
select whether video transitions
are performed on field 1 only
(Field 1), field 2 only(Field 2), or
the current field (Both).
Select the elements to be included in
the next transition of the selected ME,
MiniME
™
, or MultiScreen.
Switcher >
Transition >
ME Trans
Elements
Trans Elements
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Elements button and
select background and/or the
keys that you want to include in
the next transition.
Turn the transition limit feature on or
off for the selected ME, MiniME
™
, or
MultiScreen.
Switcher >
Transition >
ME Trans Limit
Trans Limit —
On/Off
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click the Value button and select
whether trans limit is on (On) or
not (Off).
Carbonite Black Solo Operation Manual (v1.2) — Custom Controls • 71