User Manual

DescriptionLocationEvent
Resets the transition limit point of the
selected ME, MiniME
™
, or
MultiScreen.
Switcher >
Transition >
ME Trans
Trans Limit —
Reset
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Action button and
select Reset Limit.
Sets the transition limit point of the
selected ME, MiniME
™
, or
Switcher >
Transition >
ME Trans
Trans Limit — Set
MultiScreen. You must select the point
in the transition that you want to place
the limit before running this event.
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Action button and
select Set Limit.
Select the limit point for the trans limit
of the selected ME, MiniME
™
, or
MultiScreen.
Switcher >
Transition >
ME Trans Limit
Value
Trans Limit —
Value
1. Click the ME button and select
the ME, MiniME
™
, or
MultiScreen that you want to
perform the event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Enter the point in the transition
that you want to place the trans
limit in the Value (%) field.
Select the video format that the
switcher will operate in.
Switcher
Installation >
Reference >
Video Format
Video Mode
1. Click the Video Mode button
and select the video format for
the switcher.
Send the Cue command and name of
clip to cue to the selected device.
Devices >
Video Server
Video Server —
Cue
1. Click Cue.
2. Click the Video Server button
and select the device you want
to send the command to.
3. Click a Channel button to select
the channel you want to send the
command to.
4. Enter the identifier of the clip in
the Clip Name field.
Send the Loop Off command to the
selected device.
Devices >
Video Server
Video Server —
Loop Off
1. Click Loop Off.
2. Click the Video Server button
and select the device you want
to send the command to.
3. Click a Channel button to select
the channel you want to send the
command to.
Send the Loop On command to the
selected device.
Devices >
Video Server
Video Server —
Loop On
1. Click Loop On.
DescriptionLocationEvent
2. Click the Video Server button
and select the device you want
to send the command to.
3. Click a Channel button to select
the channel you want to send the
command to.
Send the Play command to the
selected device.
Devices >
Video Server
Video Server —
Play
1. Click Play.
2. Click the Video Server button
and select the device you want
to send the command to.
3. Click a Channel button to select
the channel you want to send the
command to.
Send the Record command to the
selected device.
Devices >
Video Server
Video Server —
Record
1. Click Record.
2. Click the Video Server button
and select the device you want
to send the command to.
3. Click a Channel button to select
the channel you want to send the
command to.
Send the Stop command to the
selected device.
Devices >
Video Server
Video Server —
Stop
1. Click Play.
2. Click the Video Server button
and select the device you want
to send the command to.
3. Click a Channel button to select
the channel you want to send the
command to.
Select the custom matte color for the
selected ME or aux. Each component
Switcher >
Matte > Wash
Color (HSL)
Wash Color (HSL)
of the HSL color must be inserted
individually. This is the second color
of the wash, the first color is set from
the matte color.
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Matte button and select
Wash.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Component button and
select the HSL component you
want to assign a value to. A
value should be applied to all
three components.
5. Enter a value for the selected
component in the Value (%)
field.
Select a preset wash color for the
selected ME. This is the second color
Switcher >
Matte > Wash
Color (Preset)
Wash Color
(Preset)
of the wash, the first color is set from
the matte color.
1. Click the ME button for the ME
that you want to perform the
event on.
72 • Custom Controls — Carbonite Black Solo Operation Manual (v1.2)