User Manual

DescriptionLocationEvent
2. Click the Matte button and select
Wash.
3. Click the Color button and select
the color you want to use.
Reset the matte color for the selected
ME. This is the second color of the
Switcher >
Matte > Wash
Color Reset
Wash Color Reset
wash, the first color is set from the
matte color.
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Matte button and select
Wash.
Disable the wash generator for the
selected ME.
Switcher >
Matte > Wash
Enabled Reset
Wash Generator —
Disable
1. Click the ME button for the ME
that you want to perform the
event on.
Enable the wash generator for the
selected ME.
Switcher >
Matte > Wash
Enabled
Wash Generator —
Enable
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Wash button and select
whether the wash generator is
enabled (On) or not (Off).
Select whether the wipe reverses
direction for every second transition of
the selected ME.
Switcher >
Transition >
Wipe Direction
Wipe Direction
(Flip-Flop)
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Pattern button and
select Wipe.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Parameter button and
select Flip-Flip.
5. Click the Value button and select
whether Flip-Flop is on (On) or
off (Off).
Select the direction for the wipe
transition of the selected ME.
Switcher >
Transition >
Wipe Direction
Wipe Direction
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Pattern button and
select Wipe.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Parameter button and
select Direction.
5. Click the Value button and select
whether the wipe moves in a
forward (Forward) or reverse
(Reverse) direction.
DescriptionLocationEvent
Select the aspect ratio for the wipe
pattern you want to use for a wipe
transition of the selected ME.
Switcher >
Transition >
Wipe Param
Wipe Pattern —
Aspect Ratio
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Parameter button and
select Aspect.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Enter an aspect ratio in the
Value (%) field.
Select the custom color you want to
apply to the border of the pattern for
Switcher >
Transition >
Wipe Pattern —
Border Color (HSL)
the wipe transition of the selected ME.Wipe Border
Color (HSL) Each component of the HSL color must
be inserted individually.
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Matte button and select
Wipe Border.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Component button and
select the HSL component you
want to assign a value to. A
value should be applied to all
three components.
5. Enter a value for the selected
component in the Value (%)
field.
Select the preset color you want to
apply to the border of the pattern for
the wipe transition of the selected ME.
Switcher >
Transition >
Wipe Border
Color (Preset)
Wipe Pattern —
Border Color
(Preset)
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Matte button and select
Wipe Border.
3. Click the Color button and select
the preset color you want to
apply to the border.
Select the size of border for the wipe
pattern you want to use for a wipe
transition of the selected ME.
Switcher >
Transition >
Wipe Param
Wipe Pattern —
Border Size
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Parameter button and
select Border Size.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Enter a size for the border in the
Value (%) field.
Carbonite Black Solo Operation Manual (v1.2) — Custom Controls • 73