User Manual

Switcher Soft Reset
If required, the switcher can be reset to return it to a
user-dened default setting, or the factory default state.
A reset can be performed for the entire switcher, or
individual components, such as keys.
Soft Reset
The software reset returns the switcher to the default
state. Black is selected on all buses, all keys are cut
off-air, and the transition rate is set back to default. This
is useful if you need to return the switcher to a known
state.
To Reset the Switcher Software
1.
Press and hold MENU.
2.
Press RESET.
Custom Reset Settings
You can customize many of the default switcher
parameters and save them as a user-dened reset settings.
These custom reset settings can then be recalled when
you want to return the switcher to a previous state.
To Save a Custom Reset Setting
You can customize many of the default switcher
parameters and save them as a user-dened custom reset.
Tip: Custom reset settings can also be set from the Memory >
RState tabs on the Live Assist node in DashBoard.
1.
Press MENU > RESET > NEXT.
2.
Use the Attrib knob to select Media.
3.
Use the Media knob to select Media1.
4.
Use the Value knob to select whether the
Media-Store channel is reset with a switcher reset
or not.
•
NoRst — the Media-Store channel is not reset
•
Reset — the Media-Store channel is reset with
a switcher reset
5.
Repeat this for the remaining Media-Store channels.
6.
Use the Attrib knob to select Aux.
7.
Use the Aux knob to select Aux 1.
8.
Use the Value knob to select whether the Aux bus
is reset with a switcher reset or not.
•
NoRst — the Aux bus is not reset
•
Reset — the Aux bus is reset with a switcher
reset
9.
Repeat this for the remaining Aux buses.
10.
Use the Value knob to select whether the Aux bus
is reset with a switcher reset or not.
•
NoRst — the Aux bus is not reset
•
Reset — the Aux bus is reset with a switcher
reset
11.
Repeat this for the remaining Aux buses.
12.
Use the Attrib knob to select MiniME.
13.
Use the MiniME knob to select MME 1.
14.
Use the Value knob to select whether the MiniME
™
is reset with a switcher reset or not.
•
NoRst — the MiniME
™
is not reset
•
Reset — the MiniME
™
is reset with a switcher
reset
15.
Repeat this for the remaining MiniME
™
outputs.
16.
Use the Attrib knob to select MltScr.
17.
Use the MltScr knob to select MSC 1.
18.
Use the Value knob to select whether the
MultiScreen is reset with a switcher reset or not.
•
NoRst — the MultiScreen is not reset
•
Reset — the MultiScreen is reset with a
switcher reset
19.
Press NEXT > NEXT > NEXT.
20.
Press RState Save and Confrm.
To Load a Custom Reset Setting
Tip: Custom reset settings can also be set from the Memory >
RState tabs on the Live Assist node in DashBoard.
1.
Press MENU > RESET.
2.
Press RState Load.
You can also press and hold MENU and press Reset
All.
Factory Default Settings
You can restore the switcher to the factory default state.
All installation and personality settings are reset.
To Factory Reset the Switcher
1.
Press MENU > RESET > NEXT > NEXT > Factry
Reset.
2.
Press the Confrm knob to load the factory default
settings.
76 • Switcher Soft Reset — Carbonite Black Solo Operation Manual (v1.2)