User manual

Installation (Iss. 05) • 10
To install the Flat Metal Plate
1. Affix the flat metal plate to the bottom of the chassis using the chassis
screws as shown in Figure 3.
Figure 3 Flat Metal Plate Installation Option
2. Affix the metal plate by the two extended holes to the desired location
with customer supplied bolts or screws according to the installation
requirements.
Non-Slip Pads
Four non-slip adhesive pads have been supplied for desktop placements. Simply
remove the protective backing film from the adhesive and affix one non-slip pad
to each of the four corners on the bottom of the ADC-9032 chassis.
Optional Mounting Accessories
Ross Video is committed to providing practical solutions for the needs of your
high-quality broadcast facility. The following product may be ordered separately
to expand your installation options.
BPM-9000 Mounting Bracket
The BPM-9000 Angle Mounting Bracket enables a single ADC-9032 to be
installed in positions not possible with the flat metal plate. The installer must
provide screws or bolts for installing in the desired location. The bracket has a
90° angle.