User manual

Configuration (Iss. 05) • 16
2. To change Video Standard configuration to PAL (625/50):
• Keep the Function Select in Position 0.
• Press the Down button once.
• The DOWN LED will be unlit and the UP LED will be lit, to
indicate PAL (625/50) configuration selection.
Function Setup and Configuration Menu Table
A single press of the Down and Up buttons is a “momentary” click of the
button unless indicated by “(h)”.
Table Legend
+ Press the Up button from the default position
– Press the Down button from the default position
(h)
Hold Up or Down button for 2-3 seconds for faster adjustment or special
function
* Factory default state

Lit LED display

Unlit LED display
Flashing LED display
Table 2 Function Setup and Configuration Menu
Function
Selection
Switch
Position
Function
Menu
Up/Down Buttons Mode
Selection Menu
LED Display
DOWN UP
0
Video
Standard
NTSC*

PAL-B –

PAL-M –

PAL-N –

1
Auto Gain
On +

Off*

2
Not implemented
3
Standard/
VTR Mode
Standard Mode On*

VTR Mode On –
