User manual

ASI-310 User Manual (Iss. 03) Configuration • 4–1
Configuration
In This Chapter
This chapter explains how to use the user interface to set up the ASI-310. This discussion is based
on the use of DashBoard through a network connection. The order of sections in this chapter
follows the workflow required to setup the ASI-310 for operation. It is recommended that you
proceed through the following sections in order to achieve the best possible understanding of the
product. For information on using the OSD menus, refer to the chapter “Using the On-Screen
Menus” on page 5-1.
The following topics are discussed:
• On-screen Display Settings
• ASI-to-310 Converter Settings
• 310-to-ASI Converter Settings
• GPI/O Settings
• String Settings
• Alarm Settings
• Monitoring