User manual

5–4 • Using the On-Screen Menus ASI-310 User Manual (Iss. 03)

Using the Menus

The available menus that can be selected via the OSD are described in Table 5. 1 .

The use of the menus to change settings will be illustrated by the following example:

1. Navigate to the Setup Menus entry on the top row, as discussed previously, by using the

Forward and Back positions of the Menu switch.

2. If the Menu name (for example, Settings) is highlighted (brighter than other text), skip

to step 3. If it is not highlighted, press the Menu switch In to highlight it.

3. Press the Menu Switch Down or Up to step through the available menus.

4. When you reach Settings, select it by pressing the Menu switch In. The display should

be similar to the one shown below.

OSD Settings Menu

5. Press the Menu switch Down or Up to step through the available items that you can set

on this menu.

6. When you reach the OSD Color item, select it by pressing the Menu switch In.

7. Press the Menu switch Down or Up to step through the available values for this item.

Note that the background color changes at each step.

8. When you reach the desired value (desired background color in this example), select it

by pressing the Menu switch In.

9. Repeat steps 5-8 to select values for the other settings that you want to change.

10. To switch to a different menu: press the Menu switch Up or Down repeatedly until the

selection bar moves to the title. Press the Menu switch In. Return to step 3.

Table 5.1 Available Menus

Status (left column) Setup Menus (center column) Exit (right)

Product Settings Exit

GPIO Status ASI to 310

Alarms 310 to ASI

Alarm Counters GPIO

Edit Strings

Alarms

Slot 8

ASI-310 Convertor

EXITSettingsProduct

OSD Color

OSD Video

Counters

Factory Default

White

525 Line

Reset

OSD Enabled