Operator`s manual

CrossOver 16 User Manual (v4.0) Configuration • 2–9
To configure mnemonic properties:
1. Press MENU.
2. Press the CONFIG Wipe Pattern button.
3. Press the Input knob to display the Input
menu.
4. Press the Mnemnc knob to display the
Mnemonic menu.
5. Press NEXT.
6. Use the Size knob to select the text size for
the label. You can choose from the following:
• Large — Only the first 2 characters are
displayed.
• Medium — The first 4 characters are
displayed on the top line and the last 2
characters are displayed on the bottom line.
• Small — All 6 characters are displayed.
7. Use the Color knob to select the
background color of the mnemonic display. You
can choose from the following:
• Yellow
• Green
• Orange
8. Use the Inv knob to select the text
appearance. You can choose from the following:
• No — Black text is displayed on a colored
background.
• Yes — Colored text is displayed on a black
background.
9. Press NEXT until Save is displayed.
10. Press the Save knob to save the properties.
IP Address
The switcher is equipped with an Ethernet port to
allow remote access. By default, the switcher uses
DHCP to automatically obtain an IP address. You
can manually set an IP address, network mask, and
default gateway if your network does not have a
DHCP server.
Note:
• You do not need to connect your switcher to a
network for it to function.
To configure a DHCP IP address for your
switcher:
1. Ensure your switcher is connected to your
network via the ethernet port.
2. Press MENU.
3. Press the SYSTEM Wipe Pattern button.
4. Press NEXT until IP Addr is displayed.
5. Press the IP Addr knob to display the IP
Address menu.
6. Press the Edit knob.
7. Use the IPMode knob to select DHCP.
8. Press the IPMode knob to save your
selection.
9. Press the Reboot knob to commit the
change and reboot the switcher. Press the
Cancel knob to discard the change and return to
the previous setting.
To configure a static IP address for your switcher:
1. Ensure your switcher is connected to your
network via the ethernet port.
2. Press MENU.
3. Press the SYSTEM Wipe Pattern button.
4. Press NEXT until IP Addr is displayed.
5. Press the IP Addr knob to display the IP
Address menu.
6. Press the Edit knob.
7. Use the IPMode knob to select Static.
8. Press NEXT until IPAddr is displayed.
9. Use the left knob to select the data to
configure. You can choose from the following:
• IPAddr — Configure the IP address
(configure this first).
• Mask — Configure the network mask.
• Gatwy — Configure the default gateway.
10. Use the Field knob to select the fields in the
address.
11. Use the Value knob to modify the field
value.
MENU
NEXT
NEXT
MENU
NEXT
MENU
NEXT
NEXT