Operator`s manual

2–12 • Configuration CrossOver 16 User Manual (v4.0)
4. Double-press the middle knob at a rate you
feel is comfortable. This defines the
double-press rate.
5. Press MENU to save the setting.
Resource Sharing
The switcher can use one Chroma Key and two
channels of DVE simultaneously. You can specify
how the Chroma Key is shared between keys and the
DVE resources are shared between keys and the
transition area on your switcher.
To specify resource sharing:
1. Press MENU.
2. Press the SYSTEM Wipe Pattern button.
3. Press the Rsrc Mode knob to display the
Resource Mode menu.
4. Use the ChrKey knob to select how the
Chroma Key resource is shared between keys.
You can choose from the following:
• KEY1 — The Chroma Key is locked to Key
1. Only Key 1 can display a Chroma Key.
• KEY2 — The Chroma Key is locked to Key
2. Only Key 2 can display a Chroma Key.
• KEY3 — The Chroma Key is locked to Key
3. Only Key 3 can display a Chroma Key.
• FLOAT — The Chroma Key can be used by
any key. If another Chroma Key is on-air, you
are prompted to capture the Chroma Key
resource for the new key.
• ASK — The Chroma Key can be used by any
key. If another Chroma Key is in-use (on or
off-air), you are prompted to convert the
original Chroma Key to an Auto-Select Key,
take it off-air, and use the Chroma Key
resource for the new key.
5. Press the ChrKey knob to select the
Chroma Key sharing mode.
6. Use the DVE1 knob to select how the first
DVE resource is shared between keys and the
transition area. You can choose from the
following:
• KEY1 — DVE channel 1 is locked to Key 1.
• KEY2 — DVE channel 1 is locked to Key 2.
• KEY3 — DVE channel 1 is locked to Key 3.
• TRANS — DVE channel 1 is locked to
performing transitions.
• FLOAT — DVE channel 1 can be used by
any key or to perform a transition. If two
channels of DVE are in use and on-air and
you attempt to use a DVE channel, you are
prompted to steal one of the DVE channels.
• ASK — DVE channel 1 can be used by any
key or to perform a transition. If two channels
of DVE are in use (on or off-air) and you
attempt to use a DVE channel, you are
prompted to steal one of the DVE channels.
7. Press the DVE1 knob to select the sharing
mode for the first DVE resource.
8. Use the DVE2 knob to select how the
second DVE resource is shared between keys
and the transition area. You can choose from the
following:
• KEY1 — DVE channel 2 is locked to Key 1.
• KEY2 — DVE channel 2 is locked to Key 2.
• KEY3 — DVE channel 2 is locked to Key 3.
•
TRANS
— DVE channel 2 is locked to
performing transitions.
• FLOAT — DVE channel 2 can be used by
any key or to perform a transition. If two
channels of DVE are in use and on-air and
you attempt to use a DVE channel, you are
prompted to capture one of the DVE
channels.
• ASK — DVE channel 2 can be used by any
key or to perform a transition. If two channels
of DVE are in use (on or off-air) and you
attempt to use a DVE channel, you are
prompted to capture one of the DVE
channels.
9. Press the DVE2 knob to save your selection.
10. Press the Confrm knob to commit the
change. Press the Cancel knob to cancel the
change.
MENU
MENU