Operator`s manual

5–4 • Custom Controls CrossOver 16 User Manual (v4.0)

9. Use the Size knob to select the text size for

the label.

• Large — Only the first two characters are

displayed.

• Medium — The first four characters are

displayed on the top line and the last two

characters are displayed on the bottom line.

• Small — All six characters are displayed.

10. Use the Color knob to select the

background color of the mnemonic display.

11. Use the Inv knob to swap the color of the

text and the background.

12. Press NEXT > Save.

Note:

• The Invert (Inv) selection is not applied when the

mnemonic is in split mode. In split mode, the top

half of the display is inverted, and the bottom is

not.

Deleting Custom Controls

Any custom control on the switcher can be deleted.

To Delete a Custom Control:

1. Press MENU > EDIT.

2. Use the Bank knob to select the bank that

the custom control you want to delete is stored

on, or select the bank directly.

3. Use the CC knob to select the custom

control that you want to delete, or select the

custom control on the bus directly. The custom

control shows a

next to the number.

4. Use the Func knob to select Delete.

5. Press the Func knob.

6. Press the Confrm knob to delete the custom

control.

Note:

• You can also delete a custom control by selecting

the custom control and pressing DELETE.

EDIT

DELETE